PMO Object - [SOLVED]

[ SOLVED by fredetmumu ]

Hello Clickers and happy new year

I'm making a remake of space taxi. For the cab movement I'm using the PMO object.
I've seen that when the "taxi" active falls down vertically without having any x speed, by pressing the up arrow to brake the fall, the active stops suddently, instead of gently brake.
I've found - however - that when the falling active has a speed on the x axys, then it brakes gently as expected by pressing the up arrow key.
This workaround is in code, and it's deactivated to show the "bug or feature".
Question. Why the PMO object behaves differently when "falling down and braking" vs "falling down, having a x speed and braking" ?
I've attached an example.

Instructions:

To show the issue :let the active fall down. Now press the up arrow key. The active brakes suddently.
To see the workaround in action: let the active fall down. Now press the left or right arrow key to give a small x speed. Now press the up arrow key. The active brakes gently.
To always have the workaround: activate the deactivated event.
To repeat the "experiment": land on a platform ( so that the active has no more x speed), or re-run the frame.

Thanks for your attention,
Sergio

Quote from fredetmumu

it's line 15 the problem , if you deactive L15 it works

oy use "object is dtandin on ground" instead of "X object il moving"

No offense fredetmumu, but I think you did not get it.

I have deactivated it intentionally to show the problem, which is a PMO controlled active having a different behaviour by braking vertically when:

the active falls

and

the active falls having a speed on the x axys.

In my opinion the PMO object should behave the same by braking vertically, in other terms the vertical braking behaviour should not depend on the active horizontal speed.

Thousand thanks fredetmumu, you are definately right ! That was the reason, I didn't know that !
Again, the "problem" was between the chair and the keyboard..

Have a nice day,
Sergio