Welcome to our brand new Clickteam Community Hub! We hope you will enjoy using the new features, which we will be further expanding in the coming months.

A few features including Passport are unavailable initially whilst we monitor stability of the new platform, we hope to bring these online very soon. Small issues will crop up following the import from our old system, including some message formatting, translation accuracy and other things.

Thank you for your patience whilst we've worked on this and we look forward to more exciting community developments soon!

Clickteam.
  • I've finally started hosting again; I've realized how intuitive the Lacewing C++ library is and I have a 4 line default Lacewing DLL server running build 20 :)

    IP: 99.164.78.31
    Port: 6121

    I cannot guarantee uptime, but I will try to keep it up as much as I can ;)

    Status: Please login to see this picture.

    Working as fast as I can on Fusion 3

  • Quote from dragonguy

    Jamie has a short Memory Span, in two months he won't remember I said this.

    See, I'm nice, so I'll remind him (plus I could just link him back here.) =P

    My lacewing server (pylacewing):
    lacewing.thegt.org:6121

  • I now can use MY image(sorry, some forum glitch, or something, but I can't just post it in directly): :(
    Please login to see this picture.
    Wait... I can. nvm.

    My lacewing server (pylacewing):
    lacewing.thegt.org:6121

    Edited once, last by NUGGETRON: UPDATE (October 30, 2011 at 12:02 AM).

  • Host: bob7ult.dyndns.org
    Port: 6121
    Status: Please login to see this picture. (if it doesn't load, the server is down, otherwise, just read the image.)

    My lacewing server (pylacewing):
    lacewing.thegt.org:6121

    Edited once, last by NUGGETRON (October 30, 2011 at 12:16 AM).

  • I had written a real bad version of a server and tried to update it but seem to be having an issue with connecting with flash. I have a policy file that I used from the other server I wrote and that aspect works fine on that server so I am not sure what I can be doing wrong. I am using build 20 with this one and was using build 17 when I built the other.

    Is there any known issues with build 20 in regards to connecting/hosting flash?
    Does anyone have a server built on 20 that is hosting flash that is for public use?
    On the first version I used the web server object as well but on the one I did not. Could that be my issue?

    At this point I am lost, I can't even get it to try to connect as far as the server shows. The app does connect as an exe file and I have even tried it as an swf with all firewall stuff turned off, still no luck.

    Any advice would be wonderful. I am very short on time on this project and need to get this matter behinde me.


    Thanks in advance,
    K

    Please login to see this link.


  • I didn't read your whole post, but here's what I know:
    LB's server Please login to see this picture. support flash.
    SortaCore (Phi)'s server Please login to see this picture. support flash.
    My server supports flash but has about 75% uptime. Right now it is Please login to see this picture. (nothing = offline.)
    LeDev Please login to see this picture. support flash.
    And KlikFarm Please login to see this picture. support flash.

    All the information is up-to-date. If you see a lot of blanks, that means you need to wait for my server to come online.

    My lacewing server (pylacewing):
    lacewing.thegt.org:6121

  • NUGGET, are you checking the non-flash server port is running before you state whether it supports Flash?
    Otherwise a server could support Flash but just not be running. ;)

    Darkwire Software Lead Programmer (C++ & C#)
    Please login to see this link. | Please login to see this link. | Please login to see this link. | Please login to see this link.

  • Weird, I have my ports forwarded for 843 and yet whether I run a Flash Policy Server or any other server, it is not visible to the outside world o_o and the settings are the exact same as for my lacewing server :\

    Working as fast as I can on Fusion 3

  • NUGGET, are you checking the non-flash server port is running before you state whether it supports Flash?
    Otherwise a server could support Flash but just not be running. ;)

    Indeed, however:
    a) I can only check for one port
    and
    b) You will address me "NUGGETRON" or "Oh, exalted one," whichever you prefer.

    My lacewing server (pylacewing):
    lacewing.thegt.org:6121

  • I need to recompile my server with a working version of Lacewing - it uses some 0.3.0 release that still happened to have the Relay classes, I need to backdate to 0.2.6 for compatibility with the Build 20 Relay extensions.

    Working as fast as I can on Fusion 3

  • Server.klikfarm.com and Ledev.org are down. :(

    My Please login to see this link. (which I actually use), my Please login to see this link. (which I mostly don't use), and my Please login to see this link. (which I don't use anymore pretty much at all really). If there are awards for "'highest number of long forum posts", then I'd have probably won at least 1 by now. XD

  • Does anybody know how much longer ledev.org will be down?

    EDIT: Never mind, it seems to be working...

    EDIT 2: Actually, even though the website is up, the server still seems to be down...

    My Please login to see this link. (which I actually use), my Please login to see this link. (which I mostly don't use), and my Please login to see this link. (which I don't use anymore pretty much at all really). If there are awards for "'highest number of long forum posts", then I'd have probably won at least 1 by now. XD

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!