Printable View
Hi, I have a problem with the resolution of a software that I have made for home automation.
I developed the graphics with 1280x800 resolution but it is not possible to adapt this resolution on cards that have lower resolution.
Unfortunately "change resolution mode" does not work because I have used a special "sub application" extension.
is there an extension that could adapt to a lower resolution?
Thanks
Guess you need to resize your App then
Unfortunately it is not possible, the Software is very complex and must be compatible with many monitors. However it is not an App. There is no external system that adapts a high resolution to the lowest one? downscaling
Or a Game..
In that case idk..
I'm assuming you tried selecting Change resolution mode under the settings tab under Full screen mode?
EXACT I tried the change resolution mode, but it works only on higher resolutions. Unfortunately, a good part of the Software is cut.Quote:
Originally Posted by Perry
With MMF2 I tried all the functions, but without getting the result. I tried to download the Ultimate Full screen extension, but with sub application it has problems.
@daniele : Not sure if I misunderstand your problem, but downscaling can be done easily by using the attached settings. I simulated your problem on my HD desktop by choosing a resolution of 2560 x 1600.
Ticking fit inside will result in vertical bars on the sides and avoids distortion of your assets, while just choosing "Resize to fill window" will pinch your app on the vertical axis when going from 1280 x 800 to 1280 x 600. Ticking "maximize on boot up" is important to resize the app window to your actual display output which auto-provides the reference for rescaling your frame to the new window margins.
https://picload.org/image/dacigdpa/r...onsettings.png
Thank you for your help.
I tried, but the sub applications no longer appear in place, they act as if the resolution had not changedAttachment 24803Attachment 24804
I sent you two photos:
one with an original resolution of 1280x800 with the window on the right that appears correctly
the second picture I made the changes as you told me, but the window on the right appears in the center of the home
@daniele : Sub-Apps do (unfortunately) not auto resize due to the display settings (think of them as individually handled windows that are not affected by the main app display output). You have to manually resize and reposition your sub-app elements using some calculations involving the scaling factors of the main app after stretch. I made you a commented example with code for distorted stretch and fit inside stretch (vertical bars in your example).
https://www.dropbox.com/s/s91oowqx7h...ample.mfa?dl=0
If you deactivate the code you see the same thing happening as in your posted pics.
I thank you very much for your help, unfortunately I could not adapt your code to my code. your example is perfect and works very well, but I have problems with sub applications. if I put the settings you gave you, at normal resolution, they do not fit correctly. I try to do some tests, but I do not think I can get positive results.
Thanks again, you have been a great help
No problem, always learning something myself^^ really hope you’ll find a solution working for your setup, those sub-apps can cause a lot of trouble...
Edit: in case it should be possible to boil it down to an .mfa that shows your trouble you can PM me anytime.
You are very kind and helpful. Thank you for your help