Beta 4 - EXC_BAD_ACCESS crash

I have a bug, I keep getting these type of bugs during running of any of my projects with the new betas 1-4 post release, some one please tell me what you need from me to figure out what I am doing wrong or if it's a problem with the runtime. These problems do not exist in the official release. Thanks in advance for the input.

[Session started at 2012-04-09 21:46:19 -0400.]
GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys000
Loading program into debugger…
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
Program loaded.
target remote-mobile /tmp/.XcodeGDBRemote-225-50
Switching to remote-macosx protocol
mem 0x1000 0x3fffffff cache
mem 0x40000000 0xffffffff none
mem 0x00000000 0x0fff none
run
Running…
[Switching to thread 7171]
[Switching to thread 7171]
sharedlibrary apply-load-rules all
continue
AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
Program received signal: “EXC_BAD_ACCESS”.
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
Cannot access memory at address 0x2fdfe9b8
Cannot access memory at address 0x2fdfe9b8
(gdb)

Maybe your Audio Codec?!?

Please just send me a mfa that has the problem, and the XCode project of the same mfa. Does it occur on the simulator?

I sent you a e-mail today with the MFA Francois, also note after reverting back to the original iOS runtime release, and attempting to compile another game I get this warning...


[Session started at 2012-04-10 22:13:14 -0400.]
GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001
Loading program into debugger…
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
Program loaded.
target remote-mobile /tmp/.XcodeGDBRemote-187-58
Switching to remote-macosx protocol
mem 0x1000 0x3fffffff cache
mem 0x40000000 0xffffffff none
mem 0x00000000 0x0fff none
run
Running…
[Switching to thread 7171]
[Switching to thread 7171]
sharedlibrary apply-load-rules all
continue
AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
Program received signal: “EXC_BAD_ACCESS”.
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
Cannot access memory at address 0x2fdfe8f4
Cannot access memory at address 0x2fdfe8f4
(gdb) ^C

and a shutdown, is it my sound samples?

Same issue after using the new Dat file you sent Francois, could it be because I am using Xcode 3.2.5?

After testing Noble Armada on the new Dat File and Beta 4 I get the following in the console....

[Session started at 2012-04-11 22:36:55 -0400.]
GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001
Loading program into debugger…
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
Program loaded.
target remote-mobile /tmp/.XcodeGDBRemote-214-60
Switching to remote-macosx protocol
mem 0x1000 0x3fffffff cache
mem 0x40000000 0xffffffff none
mem 0x00000000 0x0fff none
run
Running…
[Switching to thread 7171]
[Switching to thread 7171]
sharedlibrary apply-load-rules all
continue
AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
Program received signal: “EXC_BAD_ACCESS”.
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
Cannot access memory at address 0x2fdfe9b8
Cannot access memory at address 0x2fdfe9b8
(gdb)

I am updating Xcode currently

Just tried Noble Armada again on my iPod. I get no crash at all. I cant get past choice screen (touching the center has no effect).
Can you tell me how to get past that screen, and exactly where it crashes and how to get the crash?