Printable View
Hello, i tried to make sliding boxes, but when stills overlaps another copied objects from him :(, the X[Left, Right blah detector] is overlapping [Slide Box] don't works. The grid size are 32x32.
* Note * Presses enter to slide the box. * End of my note *
.........................
No! Help me!
maybe if you post an example of what you have so far, people will be able to understand what you're asking.
It is hard to tell exactly what your problem is if we can't see it ourselves.Quote:
Originally Posted by GamerH2
It's just a bump
What? All your posts are really weird man...
I've made 2 mfa's of what I think you're looking for. Check them out and let me know.
No, are that type https://www.youtube.com/watch?v=_ZBW...utu.be&t=7m43s
I tried to make it, it works but the boxes overlaps other boxes.
bump
No, are that type https://www.youtube.com/watch?v=_ZBW...utu.be&t=7m43s
I tried to make it, it works but the boxes overlaps other boxes.
bump
No, are that type https://www.youtube.com/watch?v=_ZBW...utu.be&t=7m43s
I tried to make it, it works but the boxes overlaps other boxes.
Make it so that you can't push the box when there is another box is in the way. You could use a counter and base the counter value with what side(s) are touching another box, and then also use the direction you character is to decide whether the box can be pushed.
Let's say the left side of the box is touching another, then set the counter to one.
Now:
If counter is equal to 1
and
User is NOT (negate) facing left
and --------------------------------------- Set Position of Box to: Y("box")+32
User presses spacebar
and
User is facing down
You would have to do this for each direction you'd want to push the box.
I also have not tested this.
Man, this is grid based, my problem are the box are overlapping other box.
Here is my method
Upon pressing spacebar
"Player" is facing left
"Player left detector" is ovelapping "box"
gridtimer are 0
Left detector not overlapping "box" {
set gridtimer to 9
}
grid timer <> 0
box is facing left {
set position X("Box")-4
subtract 1 from gridtimer
}
bump
Man, this is grid based, my problem are the box are overlapping other box.
Here is my method
Upon pressing spacebar
"Player" is facing left
"Player left detector" is ovelapping "box"
gridtimer are 0
Left detector not overlapping "box" {
set gridtimer to 9
}
grid timer <> 0
box is facing left {
set position X("Box")-4
subtract 1 from gridtimer
}
bump
Man, this is grid based, my problem are the box are overlapping other box.
Here is my method
Upon pressing spacebar
"Player" is facing left
"Player left detector" is ovelapping "box"
gridtimer are 0
Left detector not overlapping "box" {
set gridtimer to 9
}
grid timer <> 0
box is facing left {
set position X("Box")-4
subtract 1 from gridtimer
}
bump
Man, this is grid based, my problem are the box are overlapping other box.
Here is my method
Upon pressing spacebar
"Player" is facing left
"Player left detector" is ovelapping "box"
gridtimer are 0
Left detector not overlapping "box" {
set gridtimer to 9
}
grid timer <> 0
box is facing left {
set position X("Box")-4
subtract 1 from gridtimer
}
bump
Man, this is grid based, my problem are the box are overlapping other box.
Here is my method
Upon pressing spacebar
"Player" is facing left
"Player left detector" is ovelapping "box"
gridtimer are 0
Left detector not overlapping "box" {
set gridtimer to 9
}
grid timer <> 0
box is facing left {
set position X("Box")-4
subtract 1 from gridtimer
}
bump
Man, this is grid based, my problem are the box are overlapping other box.
Here is my method
Upon pressing spacebar
"Player" is facing left
"Player left detector" is ovelapping "box"
gridtimer are 0
Left detector not overlapping "box" {
set gridtimer to 9
}
grid timer <> 0
box is facing left {
set position X("Box")-4
subtract 1 from gridtimer
}
Needless to spam the forum, if not answered, is that your application is poorly worded .
You must quit the habit (spam ) but also to model code with Clickteam products. You have to think Aved objects and their properties. I'm preparing a example for you.
Attachment 19205
Here my mfa, the other boxes are overlapping other boxes.
bump again and again and again
bump again! That's don't are awesome!
Nope! Bump again!!!
Bummmmpp! Bump again!Quote:
Bump are horrible!
I need help!
No one is going to help you at this point. There was a fantastic example posted, and you continue to spam.
What example?Quote:
No one is going to help you at this point. There was a fantastic example posted, and you continue to spam.
This one http://clickstore.clickteam.com/sokoban_starter_kit and it's great, just purchased it today. Perfect push box example, easy to follow and implement. It's well worth the small fee.
I uses Multimedia Fusion 2 not Clickteam Fusion 2.5.
MMF2 is now obsolete, difficult to help you.
Oh! I forget that. I have clickteam fusion 2.5 free edition.
and it says: Simply Sokoban Engine open source.
No extension needed, compatible with all exporters and all Clickteam Fusion version 2.5 ( free version ).
That's cool. But i don't have international credit card and dollars. I'm brazilian
I will bump. And okay.
bump. Stahmp ignoring that thread.
Bump. stop ignoring that thread.
I made this tonight. I don't know if it will help you at all:
https://dl.dropboxusercontent.com/u/...largh-mmf2.mfa
klikhappy that example is great :)
I already have found 2 sokoban examples.
One i found in other website and the other are this. But i want to box move when you presses enter, don't are to you push pressing arrow keys.
I have made working engine but the box are overlapping other boxes.
Try this one:
https://dl.dropboxusercontent.com/u/...rgh-mmf2_c.mfa
Oh man! It's finally solved!!! Thanks!!!!
did you ever figure this out GamerH2?? i also very interested in making something using the sliding boxes like in the youtube video i want to make a sokoban kind of game but with areas of ice on the floor where the boxes wont stop they will just slide over it but whenever my engine collides with the backdrop or another box it gets stuck. if nyone can help iwould be over the moon!! thanks.