Search:

Type: Posts; User: danjo; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    1,326

    to clarify; the Y position of the block, is where...

    to clarify; the Y position of the block, is where the character original ground is
  2. Replies
    7
    Views
    1,326

    ground contact eg; number of ways to do it, but...

    ground contact eg;
    number of ways to do it, but a simplistic way, is have a block (invis) at the foot of each character.
    so for contact the 2 blocks would over lap ; (the block should be wide...
  3. Replies
    7
    Views
    1,326

    break it up into to small segments, and work on...

    break it up into to small segments, and work on creating those parts as an exercise before trying to mash it all into 1 project and confusing yourself when parts are not working or not working...
  4. The Graphic Editor Small but Large Improvement Suggestion

    I know Clickteam does not want to re-invent the wheel nor try to waste time on the graphic editor when we already can do stuff in 3rd party editors, such as Gimp, Photoshop, etc.
    But, a suggestion...
  5. you have 2 layers; 1 is roof on top; the other is...

    you have 2 layers; 1 is roof on top; the other is the "player layer" with walls of the house; on this layer also is invisible actives/triggers , so when you cross it - or land on it (eg, outside...
  6. Replies
    3
    Views
    289

    steam is for steam - not your stand alone; if you...

    steam is for steam - not your stand alone; if you make that mistake you will have to contact CT and get it sorted
  7. Replies
    12
    Views
    709

    that size sounds like its insanely un-optimized

    that size sounds like its insanely un-optimized
  8. i know the creator, and ive seen this code.. and...

    i know the creator, and ive seen this code.. and its way above intermediate level... infact its mind boggling.
    id suggest finding someone who specializes with shaders and work from there.
  9. Replies
    2
    Views
    310

    i dont think you can copy across your path...

    i dont think you can copy across your path movement for another object.. it would be nice to copy them tho.

    a tip/ workaround for this:
    make a backdrop with a line representing your path, you can...
  10. there's been 360 platform engines done in the...

    there's been 360 platform engines done in the past; the most accurate way is using sin/cos on 2 markers that are used to detect the angle of surface you are on.
    for the 360 part; you can split the...
  11. Replies
    5
    Views
    1,224

    eventually chris will get to it and fix it for...

    eventually chris will get to it and fix it for you/ email either and he will see it. re: items on reactor, i dont think theres a filter, but you will see everything on the patreon pages.
  12. Replies
    374
    Views
    34,451

    Sticky: you can get around this using multiple objects...

    you can get around this using multiple objects together, and using just 1 of them visibly.
  13. Replies
    11
    Views
    962

    there are tons of free graphic sites - do some...

    there are tons of free graphic sites - do some searching; open game art for 1
  14. Replies
    6
    Views
    2,327

    here we go : sigh!

    here we go : sigh!
  15. Replies
    6
    Views
    2,304

    yeah, missing the fxc files from copperbar and...

    yeah, missing the fxc files from copperbar and colorcycle
  16. Replies
    192
    Views
    22,132

    restarting the current frame is somehow broken. i...

    restarting the current frame is somehow broken. i have a project which has 115 frames; each with a different game on each frame, and it used to work, restarting the current frame - would replay that...
  17. Replies
    192
    Views
    22,132

    ive always wondered why the lines option wasnt...

    ive always wondered why the lines option wasnt available as a grid. good to see it here now - even if it is such a minor thing
    the set flags addition gives a new world of possiblities too
  18. the list is the easiest way; create list with...

    the list is the easiest way; create list with each line representing one of the numbers you want to choose from(eg; 5 lines with a different result); do a normal random(1-5); and pick the line from...
  19. Replies
    8
    Views
    1,190

    i guess if the color selected was changed to...

    i guess if the color selected was changed to 0,0,0 - it would appear in fusion as transparent - ive never tried it
  20. Replies
    8
    Views
    1,190

    yes, but its a bit messy. saving your edited...

    yes, but its a bit messy. saving your edited image using screen capture to a file, and loading that file to an active.
  21. Replies
    45
    Views
    8,859

    very good extension . thanks

    very good extension
    . thanks
  22. nevermind, i saw he has shadows turned on in...

    nevermind, i saw he has shadows turned on in settings; although it doesnt work on other objects. I wish shadows would get fixed in Firefly
  23. Replies
    6
    Views
    1,398

    if you need buttons to go under things; you'll...

    if you need buttons to go under things; you'll have to make them from actives
  24. Shadows in Firefly; Patrice's Tanks of Fusion had it

    I noticed Patrice's Tanks of Fusion has a shadow for the players tank... How was this done? I looked at the code; but its a mess.
  25. Replies
    12
    Views
    1,985

    make sure you've got debugger etc turned off when...

    make sure you've got debugger etc turned off when running the examples in fusion.
  26. sparkman was kicked out of the community under no...

    sparkman was kicked out of the community under no glamorous circumstances. he's a sad character full of hotwind and an overbloated opinion of himself
  27. knowing already whats going on and how to do...

    knowing already whats going on and how to do this, i found your video to be a good lesson learning some italian ;-)
  28. Replies
    35
    Views
    7,731

    if you hadnt done so already.. on your start...

    if you hadnt done so already..

    on your start of frame; EDIT the NewPictures action; for the filename - click the expression button at bottom right corner; and use:
    ...
  29. Replies
    3
    Views
    458

    you can do many things; easiest is to move the...

    you can do many things; easiest is to move the frame around in the storyboard editor by grabbing the frame just left of the title and dragging it to another place.
  30. there was a french guy who sold some source, but...

    there was a french guy who sold some source, but it was removed. it was close to perfect but he missed somethings - eg push rocks... which i have added and made it perfect; i cannot give it out, as...
  31. Replies
    47
    Views
    4,911

    Sigh. He can never be told

    Sigh. He can never be told
  32. [WIP] 2600 Remakes Collection ~ ( open source )

    What started off to be a challenge, turned into somewhat of a monster.
    The challenge was: to Remake an A2600 Game, using 1 Frame as close as possible to the original A2600 game... & a few set of...
  33. Replies
    2
    Views
    587

    Ah. got it, i had "" in the string. all good

    Ah. got it, i had "" in the string. all good
  34. Replies
    2
    Views
    587

    BUG - has VAL ( string$ ) been broken?

    ~ bug box is under maintenance

    is anyone else getting this? Val( "insert any number" ) = 0
    I came across an error i was getting, and I had used, x= Val( Global string A). it didnt work...
  35. for me, it worked right way when i pressed space...

    for me, it worked right way when i pressed space *(im using latest 292.6 with sound optimize for play sample); but its got to do with loading in the file to memory; you can do something like a blank...
  36. Replies
    27
    Views
    3,696

    nope simon, you would think that would be an...

    nope simon, you would think that would be an obvious choice.. it needs adding
  37. Replies
    27
    Views
    3,696

    i have managed to rename them, but it is the most...

    i have managed to rename them, but it is the most cumbersome method ive ever seen right now.... WHY on earth did you just not add a RENAME on the menu when you right click a qualifier (at the bottom...
  38. Replies
    27
    Views
    179,046

    sent you a PM.

    sent you a PM.
  39. Replies
    27
    Views
    179,046

    this is one of the games i made long ago... i...

    this is one of the games i made long ago... i also remade the sequel, which i enhanced, you kind have given me some inspiration to maybe put the new one up... i got permission from DJ Mix to use...
  40. in any case Jeff is the person to talk to about...

    in any case Jeff is the person to talk to about this, but im guessing you're out of luck.
    i dont think you can exchange your steam for normal versions;
    BUT. you can use steam programs offline, and...
  41. Replies
    184
    Views
    1,084,268

    i quite like the new style load screen :)

    i quite like the new style load screen :)
  42. Replies
    3
    Views
    997

    you can do what popcorn said; set the X of the...

    you can do what popcorn said; set the X of the character to target's X position + sin(angle)* distance, Y to the targets Y position + cos(angle)*distance;
    and you could simply LOOK at the target...
  43. Replies
    22
    Views
    6,359

    looks good Ben

    looks good Ben
  44. Replies
    7
    Views
    3,022

    set a few variables for your shake; camera...

    set a few variables for your shake; camera current X,T; shake timer & shake amount;
    reserve a flag for shaking;
    if your camera shake flag is ON;
    set your camera position to the current X,y...
  45. the joystick2 has is a pad connected feature?...

    the joystick2 has is a pad connected feature? check that to determine what to use. i have an example coming soon, which does all this included. what you do is have a group for joypad, and a group...
  46. Replies
    12
    Views
    3,954

    if you are using the built in direction movement,...

    if you are using the built in direction movement, and using Angle's the DIR for the object ; then the DIR is the ( angle*11.25 ) this will help for people who just cant get their head around...
  47. Replies
    5
    Views
    1,298

    they are not a placeholder. they are a way of...

    they are not a placeholder. they are a way of putting in your code a "name" for a group of any objects.
    they can be for anything, not necessarily for collisions. its really up to the user how they...
  48. markers are easiest, or you could do loops on the...

    markers are easiest, or you could do loops on the enemies distance to player and determine that way.
  49. Replies
    5
    Views
    1,571

    you may have to just do a solid shadow that's a...

    you may have to just do a solid shadow that's a bit darker than the floor. that's if its not a huge deal. ... you may want to animate the shadow if you are going anal on it tho.
  50. Replies
    7
    Views
    1,833

    i always use ICON & NAME in the editor regardless

    i always use ICON & NAME in the editor regardless
  51. Replies
    7
    Views
    1,557

    i think someone made an example of this a long...

    i think someone made an example of this a long time ago, and probably is in the old examples.
    *** not the answer, but more of what you need to do:
    each mirror, needs to have a state (active or not...
  52. Replies
    7
    Views
    1,557

    you actually haven,t asked a question... but...

    you actually haven,t asked a question... but insinuated you want someone to make the engine for you?
  53. Replies
    5
    Views
    1,481

    a WILD GUESS at what you are trying to do; a...

    a WILD GUESS at what you are trying to do;

    a way of putting multiple conditions in 1 line; is to think about it in a different way.

    you could have 4 invisible actives [markers] of a set size;...
  54. Replies
    14
    Views
    3,563

    sshhh dave. that remains nameless ;) i think...

    sshhh dave. that remains nameless ;)

    i think this can be done tho. there is a fluid shader in the clickstore. * edit/ it looks like the fluid example is not "welding" the objects together and...
  55. Replies
    14
    Views
    3,563

    he doesnt say its unity, he mentions something...

    he doesnt say its unity, he mentions something else (remains nameless)
  56. Replies
    14
    Views
    3,563

    it has a liquid/fluid shader for the blob...

    it has a liquid/fluid shader for the blob lighting - do we have that? ... http://codeartist.mx/tutorials/liquids/
  57. Replies
    24
    Views
    5,286

    //windows extension//

    //windows extension//
  58. Replies
    1
    Views
    647

    yes- by using 2 Alt values on one of the 2...

    yes- by using 2 Alt values on one of the 2 objects; call them [X offset] and [Y offset] for example.
    you can use the Alt values to always follow its target object - by always setting the follow...
  59. Replies
    24
    Views
    5,286

    there is a microphone object if that helps. the...

    there is a microphone object if that helps. the other way would be to find an .OCX activeX file for mic's and use the activeX object.
  60. Replies
    5
    Views
    1,282

    i looked. where it is going wrong, is you havent...

    i looked. where it is going wrong, is you havent reset the Alt valUe ( conv-count ) back to [ zero ] when you either walk away or finish
    eg;
    user clicks on npc + convo_count >0 : set convo_count...
  61. Replies
    6
    Views
    1,639

    so you missed the bundle deal a while back????, i...

    so you missed the bundle deal a while back????, i bought a few and gifted to friends the deal was so good. it was dev too.
  62. yes i know. what was changed

    yes i know. what was changed
  63. add to your positioning line; for the y...

    add to your positioning line; for the y component (+0.01) on the end of it, it then doesnt crash

    so the Y should be
    YCollisionLocation( "Player_Camera", FVLastCollision( "Player_Camera" ) ) +...
  64. Replies
    44
    Views
    7,383

    if you are doing a 2d array, then you MUST write...

    if you are doing a 2d array, then you MUST write to XY, and read value at XY ( not x)
  65. Replies
    44
    Views
    7,383

    there is nothing wrong with the array. I use it...

    there is nothing wrong with the array. I use it for everything and always have, and never struck a problem. i use it for saving settings, i use it for saving scores, i use it for anything and...
  66. Replies
    44
    Views
    7,383

    no- you are doing it wrong. if you write to X1,...

    no- you are doing it wrong. if you write to X1, you should be in 1 base. if you are in 0 base, then write to [0], not 1... and you dont need to write to Y, if you are just doing a single dimension...
  67. Replies
    2
    Views
    1,065

    when you create an object; reserve one of its alt...

    when you create an object; reserve one of its alt values to use as a timer; eg alt value T
    have an event that exsists that says; every 1 sec add 1 to ALT value T of (that object) - * even if it...
  68. 1 base means it starts at 1. the zero element...

    1 base means it starts at 1. the zero element will always be a 0
  69. Replies
    8
    Views
    2,565

    number of ways to do it, but it depends all on...

    number of ways to do it, but it depends all on your movement system. for example, if you were using speed for movement then just alter the speed of the object; if your are stepping co ords; then you...
  70. Replies
    44
    Views
    7,383

    re dynamic, originally the arrays never grew and...

    re dynamic, originally the arrays never grew and the dynamic array has been around for a very long time (mmf1) so it could compensate for the static array. i was under the impression normal array...
  71. Replies
    44
    Views
    7,383

    zero base starts at 0; look at the 0 position in...

    zero base starts at 0; look at the 0 position in X
  72. you could always think about the [ SAVE GAME...

    you could always think about the [ SAVE GAME OBJECT ] which can save ALL the values of actives, along with directions etc, in 1 move. possibly it might be an easier way rather than looping or doing...
  73. Replies
    44
    Views
    7,383

    your array for example is a number array - 1...

    your array for example is a number array - 1 base,the first element will be at 1 and so on.
    say for example; you want to save a total of 10 numbers, (just a single dimension array) - so set the X...
  74. Replies
    44
    Views
    7,383

    i always use array for saving info, never ini. ...

    i always use array for saving info, never ini.
    save ( use expression ) apppath$+"filename" <- you do this once, not on an event that will trigger like always etc.
    soon as you load the array...
  75. Replies
    21
    Views
    4,254

    and you got what to lose?

    and you got what to lose?
  76. Replies
    246
    Views
    84,276

    the way i read it, it seems advisable to "Use...

    the way i read it, it seems advisable to "Use high performance GPU" rather than not.... would that be right?
  77. you make the whole background as an obstacle to...

    you make the whole background as an obstacle to begin with, and create backdrops and paste them as NON obstacles for your digging.
  78. Replies
    6
    Views
    1,416

    are you rotating that chair? tick smooth rotations

    are you rotating that chair? tick smooth rotations
  79. Replies
    1
    Views
    3,078

    nice example

    nice example
  80. Replies
    4
    Views
    2,059

    you already are looking in the right direction....

    you already are looking in the right direction. perhaps you should aim lower.
  81. Replies
    8
    Views
    1,858

    to be efficient and get a good system in place -...

    to be efficient and get a good system in place - you should NOT be adding things. that's where it gets messy and stuff goes wrong.
    FULLY plan out your system in the beginning, then go about a...
  82. there are examples if you look hard enough. try...

    there are examples if you look hard enough. try marv's site; there's also one in the reactor if you want to join the patreon
  83. Replies
    4
    Views
    1,894

    its not the OS; it will be offset in different...

    its not the OS; it will be offset in different resolutions or monitors, making it look "not right"
  84. you could also create a set of colliders, and...

    you could also create a set of colliders, and using a fastloop move the set to each object, test its collision and then move to the next. 1 set of colliders for multiple objects.
  85. Replies
    4
    Views
    1,894

    very good. but i had to drop in the window...

    very good.
    but i had to drop in the window control object; then put start of frame; set width to WinXsize; set height to WinYsize; set X pos to WinXpos (* the x pos of application); set Y pos to...
  86. Replies
    2
    Views
    781

    add a counter to use as a timer instead of the...

    add a counter to use as a timer instead of the built in timer. when there are no bricks, start adding 1 to the counter every 1 second. when the counter reaches 5 - jump to the next frame.
  87. MOUSE clicks on OBJECT + only 1 action when...

    MOUSE clicks on OBJECT
    + only 1 action when event loops >>>> destroy OBJECT

    that works, you need the limit condition
  88. you can find activating or deactivating groups...

    you can find activating or deactivating groups under [special conditions]
    also eg; upon pressing SPACEBAR > activate group (xxx..)
  89. Replies
    6
    Views
    1,358

    look in the product owners lounge forums

    look in the product owners lounge forums
  90. that order should work... but you can just do it...

    that order should work... but you can just do it in 2 lines which would also work; start of frame? create - set etc; repeat on next line.
  91. #1; you dont really need 2 objects to hold the...

    #1; you dont really need 2 objects to hold the data ( starting ammo, and drain) - just ammo will be fine; you can add and subtract from the 1 counter which will save headaches.
    #2; you can make that...
  92. this always happens with me, but only the first...

    this always happens with me, but only the first time i open it. if i close it and re-open it, it loads up quite fast.
  93. Replies
    2
    Views
    877

    from tests; i see approximately (locked at 60fps)...

    from tests; i see approximately (locked at 60fps) speed of 5 = 37-38 pixels per second, speed of 10 = 75 pixels per second. speed of 20 = 150 pixels per second. so you can see a pattern
  94. many ways to do this, just a simple one would...

    many ways to do this, just a simple one would be...
    you need 2 actives:
    1= shadow (this will be the 8 dir moving obiect)
    2= character image - this will be the animated character - it just...
  95. what is the category heading? if it another...

    what is the category heading? if it another active, you could set its hotspot centered; and then just align all the other actives under it by setting their X-pos to the headings x pos.
    if the...
  96. with a backdrop - you can set its obstacle as a...

    with a backdrop - you can set its obstacle as a ladder... but go for active, because you have a hotspot, which you can use to keep the character set to the ladder.
    eg; if the character is climbing...
  97. Replies
    1
    Views
    704

    you can move a pointer over some letters...

    you can move a pointer over some letters (actives), and press button, which then adds the letter to the string
  98. Replies
    8
    Views
    2,112

    to get angles of floors/ground you can place 2...

    to get angles of floors/ground you can place 2 detectors either side of the characters feet, and find the angle of the floor/ground by the position of those 2 detectors. its then up to you, how you...
  99. if this had better gfx - it would be a winner. i...

    if this had better gfx - it would be a winner. i would advise you go seek a pro artist to help
  100. Replies
    2
    Views
    836

    its a different product. you will get a discount...

    its a different product. you will get a discount by owning 2.5 though.
  101. when the projectile hits the ground; you can...

    when the projectile hits the ground; you can create a burning active at its place, destroying the projectile. the burning one can last for a short time, then get destroyed
  102. it may well be a nvidia issue or similar...

    it may well be a nvidia issue or similar...
  103. copying your folders will keep the extensions-...

    copying your folders will keep the extensions- and can simply copy them back; it wont however keep certain exporters - they need to be re-installed
  104. Replies
    22
    Views
    7,598

    very good - i was looking at all the videos, and...

    very good - i was looking at all the videos, and it seemed like it was like the snap to vertical all the way through
  105. Replies
    22
    Views
    7,598

    when you swing and let go; your rabbit must...

    when you swing and let go; your rabbit must remain at the same angle and rotate him back to vertical; as it is now (instant adjust) just looks very lazy. if you figured out the swinging; it will be...
  106. Replies
    5
    Views
    1,370

    use control X - and set the key values to globals...

    use control X - and set the key values to globals
    i reserve some global values for key presses; eg; globalA ( renamed to PRESS LEFT ) etc,
    with control X; all control conditions are;
    CONTROLX...
  107. its most definitely something you are not...

    its most definitely something you are not missing/doing wrong. to call something you are having trouble with a bug and nonsense - is indeed nonsense.
  108. you can do it with detectors

    you can do it with detectors
  109. its just math; collides with a vertical wall -...

    its just math; collides with a vertical wall - negate the X, collides with horizontal - negate the Y. ie x= x* -1 on a vertical wall; y= y* -1 on a horizontal wall.
    or use this formula −(2(n · v) n...
  110. can you provide an example on that outrageous...

    can you provide an example on that outrageous claim you just made please? id like to know who your were before "shinbaxter" was going back atleast 3 forum incarnations...(remembering this current...
  111. IM only saying i saw in your example. ive not...

    IM only saying i saw in your example. ive not noticed in my projects; im Def NOT onboard with you mr V
  112. Replies
    18
    Views
    3,584

    just handy... dont mix integers and floats will...

    just handy... dont mix integers and floats will save a lot of pain
  113. Replies
    4
    Views
    1,537

    does the microphone object not do what you want?

    does the microphone object not do what you want?
  114. Replies
    8
    Views
    1,621

    ive done the jumping/looping from 1 side of the...

    ive done the jumping/looping from 1 side of the level to the other that schrodinger suggests with no issues. you have to make sure it lines up, and your increments are not out of sync so you dont get...
  115. Replies
    4
    Views
    5,230

    a useful way of saving multiple numbers in 1...

    a useful way of saving multiple numbers in 1 value that i do, is to make each value for example be 3digits; eg 1 would equal 001; 25 = 025 etc. then if i wanted 4 values stored in the 1 cell ** using...
  116. Replies
    8
    Views
    2,210

    for a start - YOU CAN!

    for a start - YOU CAN!
  117. i saw your stuttering in your mfa. when i turned...

    i saw your stuttering in your mfa. when i turned ON vsync, the stuttering was "almost" gone, i only noticed it once very occasionally
  118. the only real way to do this currently, is make a...

    the only real way to do this currently, is make a launcher executable, which starts a different version depending on what the user selected. its messy.
  119. he's talking about just using fusion, not running...

    he's talking about just using fusion, not running the game.
    i'll say it... get a better pc :)
  120. Replies
    1
    Views
    1,627

    many people have done it, and you will have to do...

    many people have done it, and you will have to do it also
  121. Replies
    3
    Views
    1,066

    ^ which uses the joystick 2 object

    ^ which uses the joystick 2 object
  122. i am fairly sure you have to reset keypresses...

    i am fairly sure you have to reset keypresses start of frame on the next frame. i have come across it before and solved that.
  123. Replies
    9
    Views
    3,329

    when you create a new object; create its shadow...

    when you create a new object; create its shadow on top of it, calling the (initial pairing loop) i used for eg at the start of the frame.
    or - if you are just creating 1 object and 1 shadow now and...
  124. Replies
    13
    Views
    3,583

    ive got many projects with more frames than that,...

    ive got many projects with more frames than that, and never had a problem. its not the amount of frames which is causing your issue.
  125. make sure you add in regardless; on line 37...

    make sure you add in regardless; on line 37
    maybe also put a flag on it so it wont keep doing the same action if the animation is slow...

    animation Launching is playing
    + animation frame =4
    +...
  126. Replies
    9
    Views
    3,329

    heres a simple example to get you started.....

    heres a simple example to get you started..
    [edit] added #2 which has deleting the objects also
  127. its a good idea to have only 1 person responsible...

    its a good idea to have only 1 person responsible for, and working on then main code file. others should stick to their specialty; ie graphics or sound.
    if you have someone else wanting to work...
  128. Or: do a set like; if number of bricks

    Or: do a set like;
    if number of bricks <20 set speed to 100
    if number of bricks <40 set speed to 80
    if number of bricks <60 set speed to 60
  129. Replies
    47
    Views
    11,270

    i can get by... but it comes down to what we all...

    i can get by... but it comes down to what we all used to call "French Logic" , and heres another one
  130. Replies
    47
    Views
    11,270

    the named flags are awesome and something that...

    the named flags are awesome and something that was really needed... althought it has made something really stand out.
    the flags result text, needs to be changed from ON/OFF to TRUE / FALSE.
    when...
  131. danny's site need traffic? why werent the 5...

    danny's site need traffic? why werent the 5 reasons just listed here?
  132. Replies
    6
    Views
    3,134

    and a conflict of interest

    and a conflict of interest
  133. stop being "that guy"

    stop being "that guy"
  134. Replies
    2
    Views
    789

    its in the collision masks. checks for...

    its in the collision masks. checks for obstacle/ladder at a certain X,Y >> storyboard | collision masks
  135. Replies
    233
    Views
    60,215

    removing the 1 from the files...

    removing the <zbuffer>1</zbuffer> from the files as you suggested, allowed the .mfa to work inside fusion.
  136. Replies
    233
    Views
    60,215

    the compiled exe works fine; the .mfa running...

    the compiled exe works fine; the .mfa running inside fusion (289.3 latest build) its just a black screen - however 1.x works fine both ways
  137. Replies
    233
    Views
    60,215

    the old version works; 2.0 doesnt. black...

    the old version works; 2.0 doesnt. black screens
    dx12; win10
  138. Replies
    9
    Views
    2,520

    your OWN....

    your OWN....
  139. Replies
    10
    Views
    3,929

    you nearly are right; you need a [ground...

    you nearly are right; you need a [ground detector-invisible] which is moved with your movement (up down left right), you do you jump just like side on-and using a foot detect which will stay with...
  140. Replies
    8
    Views
    1,655

    you cant re-use steam keys; and to the newguy...

    you cant re-use steam keys; and to the newguy here; (steam) dev fusion 2.5 was avail in [Humble Clickteam Fusion 2.5 Bundle]
  141. Replies
    4
    Views
    1,265

    a long time ago i used activeX to print stuff

    a long time ago i used activeX to print stuff
  142. Replies
    30
    Views
    17,873

    Sticky: how about not commenting on something that has...

    how about not commenting on something that has Nothing to do with you.

    i wish there was the block feature back again
  143. Replies
    30
    Views
    17,873

    Sticky: i dont bother with them - you cant hear them...

    i dont bother with them - you cant hear them properly anyway - take that "advice" and run with it
  144. Replies
    30
    Views
    17,873

    Sticky: mrrogers - All your videos have really POOR...

    mrrogers - All your videos have really POOR audio. not a good start considering your are trying to explain things. Invest in a a MIC or learn your audio settings.
  145. Replies
    7
    Views
    3,712

    it contains the paid media

    it contains the paid media
  146. Replies
    10
    Views
    2,589

    blame donald :P

    blame donald :P
  147. Replies
    4
    Views
    1,245

    there have been in the past examples of this sort...

    there have been in the past examples of this sort of thing - doing pretty much what rhysd said.
  148. Replies
    22
    Views
    5,608

    i always use flags - and generally put a comment...

    i always use flags - and generally put a comment there somewhere in the beginning of the group to indicate what all the flags are for.
  149. Replies
    7
    Views
    1,711

    repeat while left mouse button is down + Xpos of...

    repeat while left mouse button is down
    + Xpos of mouse < frame width/2

    = left


    ...


    repeat while left mouse button is down
  150. Replies
    20
    Views
    4,045

    its 100% redundant. you can now deactivate single...

    its 100% redundant. you can now deactivate single lines, not only groups. so the theory of seeing events you dont want to delete is shot to pieces. you can do that without using NEVER.
    having said...
  151. Replies
    14
    Views
    5,937

    who is this mystery person appeared out of...

    who is this mystery person appeared out of nowhere with no products? perhaps you dont have access to what you may need
  152. Replies
    3
    Views
    1,655

    ABGO has examples including a match3 example -...

    ABGO has examples including a match3 example - there are examples everywhere for this - see clickstore - see the example section
  153. Replies
    10
    Views
    2,392

    go to your clickstore; downloads

    go to your clickstore; downloads
  154. you can load images into a normal active. the...

    you can load images into a normal active.
    the screen capture is limited to screen size tho
  155. Replies
    21
    Views
    8,245

    have you even tried experimenting with normal...

    have you even tried experimenting with normal effects. it doesnt look very complicated at all.
  156. the counter object HAS got the gradient option if...

    the counter object HAS got the gradient option if you want to use it
  157. Replies
    21
    Views
    8,245

    it looks like a XOR or OR applied to the "window"...

    it looks like a XOR or OR applied to the "window" image in front of the other items
  158. Replies
    195
    Views
    49,425

    looks like trolling to me chris

    looks like trolling to me chris
  159. Replies
    23
    Views
    4,157

    2nd way.. and i would debug, cause i reckon...

    2nd way.. and i would debug, cause i reckon you'll find the object not working is not on the layer you think it is
  160. Replies
    23
    Views
    4,157

    new images are better.. the collisions all must...

    new images are better.. the collisions all must be on same layer to register - check the objects not working is on the same layer - you are testing the overlap - perhaps it may not be.
  161. Replies
    23
    Views
    4,157

    i cant see, too small... put your overlap...

    i cant see, too small... put your overlap condition first, then the additions after that.
  162. Replies
    34
    Views
    9,251

    animation changes are excellent.. finally get to...

    animation changes are excellent.. finally get to expand that area
  163. Replies
    2
    Views
    679

    probably just use a string. you are referring to...

    probably just use a string. you are referring to fusions way of using FLOATS for your result. if you dont use decimals, the result will return an Integer.
  164. Replies
    12
    Views
    3,763

    contact Jeff at Clickteam with your serial number...

    contact Jeff at Clickteam with your serial number etc. he will help you ... if you are legit.
  165. Replies
    19
    Views
    4,076

    ^ this GWKTM

    ^ this GWKTM
  166. Replies
    3
    Views
    9,572

    it comes from Clickteam's extension Pack1; ...

    it comes from Clickteam's extension Pack1;
    http://www.clickteam.com/webftp/files/mmf2/Exts/MMF2ExtPack1.exe
  167. @neverk. good to see you are willing to pay for...

    @neverk. good to see you are willing to pay for F3 - Q. did you get F2.5 in the bundle? (you realize that was a bargain)
  168. CT has been doing the same thing with their...

    CT has been doing the same thing with their product and pricing models over the last decade +.
    there's always "that person - who wants it their way - usually free.
  169. Replies
    4
    Views
    1,253

    http://clickstore.clickteam.com/dynamic_touch_scre...

    http://clickstore.clickteam.com/dynamic_touch_screen_joystick?keyword=touch
  170. moving left/right with keys will do nothing -...

    moving left/right with keys will do nothing - because its always being set by the mouse's X position.
    choose 1 or the other
  171. Replies
    19
    Views
    4,021

    global values (ARE) counters/values that are kept...

    global values (ARE) counters/values that are kept which can be referenced on ALL frames.
    you have unlimited global values starting at A,B,C etc they can be renamed so you know what they are in...
  172. Replies
    7
    Views
    1,802

    but what DaveC is saying; is leave them all in 1...

    but what DaveC is saying; is leave them all in 1 Dir/Anim and just set it to which ever Frame; rather than moving between 32 images without changing animations; you could have "a lot" accessible in 1
  173. Replies
    8
    Views
    2,060

    i suggest you look at other fusion path finding....

    i suggest you look at other fusion path finding. this your job.
  174. Replies
    3
    Views
    1,109

    turn your monitor on its side, and rotate the...

    turn your monitor on its side, and rotate the display 90degree. solved ! LOL i would think hard about why you are using that res!?!
  175. Replies
    11
    Views
    3,710

    use this plugin -...

    use this plugin - http://www.rtsoft.com/forums/showthread.php?7508-Audio-Patch&goto=nextoldest
    export as .b3d

    step 1; download file- extract the .py to file folder
    step2; start blender -...
  176. Replies
    3
    Views
    1,700

    or reverse the animation...

    or reverse the animation...
  177. Replies
    11
    Views
    2,259

    where i made alterations, i added a red comment...

    where i made alterations, i added a red comment line(blank)
  178. Replies
    11
    Views
    2,259

    when i saw you asking about this, i thought WTF...

    when i saw you asking about this, i thought WTF you lazy sod. its easy. (if you understand the code) - dont copy something you dont understand. do your own which you do know what its doing.
    ...
  179. Replies
    5
    Views
    1,870

    what you see on the 2d field doesn't have to mean...

    what you see on the 2d field doesn't have to mean is it literal. 1 pixel may equal 0.1 on the 3d axis IF you want it to
  180. Replies
    5
    Views
    1,870

    normally in 3d programming for that question - is...

    normally in 3d programming for that question - is to check the distance between both collision spheres/radius is lesser - eg - if both radius is 1, and if they are closer than 1, then they are...
  181. Replies
    3
    Views
    1,399

    2d text - visibility is Always ON. cannot set it...

    2d text - visibility is Always ON. cannot set it to invisible or turn it off at start of frame; set transparency does not work either.
  182. Replies
    3
    Views
    1,700

    Feature? Animation loops (ping pong)

    Not a high priority, but perhaps as idea, with animation looping; have another that is set to "ping-pong" back and forth - so it cycles to end of frame, and cycles back to start of frame.
    maybe...
  183. it just means you must open the file from within...

    it just means you must open the file from within Fusion - already opened. dont just double click the file in explorer
  184. Replies
    10
    Views
    2,538

    classic XD

    classic XD
  185. Replies
    16
    Views
    5,481

    NO. the 2d scene and the 3D scene are 2 different...

    NO. the 2d scene and the 3D scene are 2 different "worlds"
  186. Oh please!!!! Stop with the i want a free...

    Oh please!!!! Stop with the i want a free product. clearly just tire kickers anyway!
  187. Replies
    7
    Views
    1,696

    actives will wrap, if you tell them to. they...

    actives will wrap, if you tell them to. they don't automatically wrap. (they must be set as a "moving" object - eg bouncing ball, etc - just set its speed to zero)
    if you are moving the layer, and...
  188. /extensions folder & /data/runtime folder (there...

    /extensions folder & /data/runtime folder (there are in some cases different files for both)
  189. Replies
    1
    Views
    908

    there was an example made a long time ago using...

    there was an example made a long time ago using Overlay. Its entirely possible.
  190. Replies
    1
    Views
    871

    physics objects must have the hot spot set in the...

    physics objects must have the hot spot set in the middle. having said that, this is nothing you can control, because the BOX shape that is applied will do this.
    i played with the jakes example, and...
  191. Replies
    10
    Views
    5,032

    its MagicaVoxel.. yeah im finding it a great...

    its MagicaVoxel.. yeah im finding it a great little tool for some new ideas.
    we need to lure andy back from his piles of money and come back to click. hahahaha
  192. thanks Perry. enjoy.

    thanks Perry. enjoy.
  193. Replies
    10
    Views
    5,032

    the car file looks great.. and its incredibly...

    the car file looks great.. and its incredibly easy to do something like that.
  194. setting a scene is not time consuming... its can...

    setting a scene is not time consuming... its can be almost non-existent. just by dropping, the engine and camera onto the frame its done. its no different to making a physics game - you have to...
  195. Replies
    3
    Views
    1,219

    [licks lips] :P

    [licks lips] :P
  196. Replies
    10
    Views
    5,032

    looks cool.. i like his use of billboards

    looks cool.. i like his use of billboards
  197. Replies
    9
    Views
    2,687

    firefly is still in dev; i have struck many weird...

    firefly is still in dev; i have struck many weird glitches - and some things just keep crashing the game, so i left stuff out. i was doing more effects - like scores coming out of ghosts etc, and it...
  198. Replies
    9
    Views
    2,687

    thanks marv, hope it gives you some ideas, or...

    thanks marv, hope it gives you some ideas, or play around with some things, or give you ideas to convert standard 2d click games to 3d.
  199. Replies
    6
    Views
    1,697

    thats great Triadian - it may seem obtrusive, but...

    thats great Triadian - it may seem obtrusive, but not as frustrating when you accidentally remove a material
  200. Replies
    11
    Views
    3,710

    wings3D - it by far the easiest; exports 3ds;...

    wings3D - it by far the easiest; exports 3ds; http://www.wings3d.com/ * doesn't animate
    regarding texturing - unwrap3d is extremely good; but its not free http://unwrap3d.com/u3d/index.aspx (50...
Results 1 to 200 of 500
Page 1 of 3 1 2 3