I use personally use weird named delimiters in ini for new lines and tabs
so in the ini
item1=this is line 1(?NeWlInE?)this is line 2
Replace$( "Substring Replace Unicode", GetItemString$(...
Type: Posts; User: bubba_damage; Keyword(s):
I use personally use weird named delimiters in ini for new lines and tabs
so in the ini
item1=this is line 1(?NeWlInE?)this is line 2
Replace$( "Substring Replace Unicode", GetItemString$(...
Noticed this when I was playing with loops, adding lines from one list to the 2nd list turned up with empty lines, So tested and used the String Repeater Object got to no more than 32,765 characters...
This could help in future Bézier Curves for Dummies (TDC version)
Site maybe changed but You still can access some examples here
So how do u base64 a Unicode string?
I've used base64 object to encode "Haпd" to get "SGE/ZA==" and decode to get "Ha?d"
There's something else needed to do with conversion hex, dec, octal and...
Thank you Janette5
damn event ordering can be hard at times, but your solution worked so thanks again.
I've got a alterable value problem when changing alterable's and comparing from one value to another and adding that value to the list object
the example below.
why does it skip adding lines to...
Found example in Posts DLL object Beta 4 and 5. :)
For future reference: used bass.dll from 1.6 - 1.8 fine with the bass example, couldn't find bass 1.9 (?if there was a bass.dll 1.9?) and 2.0 and...
id like to see how to use bass.dll, did you post this example?
Depending what your trying to do here's a tip
straight from the help file under "The Rich Edit Object - Actions - Control"
On : automatically gives the input focus to the...
I've been trying to get the edit box to open a directory selector from the "file object" by clicking on it.
user clicks with left button
mouse pointer is over edit box
and this is probably why we don't see dmc2 updated.
dmc2 uses older bass.dll version, newer versions from unseen development are not compatible with dmc2
I'm sure you could use the DLL object to act with bass.dll but that's as far as I go technically...
Had this problem today man it took me for a loop pulling my code back, getting the BEX Error.D:<
I did have CRC32.mfx in the runtime folder it was 11kb compared to 24kb one in the extension folder....
how does anyone insert binary value of 03 00 FF in the power registry object?
I just get a result 03 FF in my registry.
I was making a supermarket trolley example tried a few ways but came into problems with the physic objects
1st was the bouncing ball and it passing through an active object very slowly when it's...
what is the most recent version of the wiiemote object and anyone got a example?
any developments on any new web browser extensions or we still stuck with the outdated Internet explorer?:(
how about the array object?
create one for text and the other for values and use fast loops to value them.
Why should i have to change the type of array in properties just to get a (simple) value array to work?
does the string tokenizer need a properties option or flag to accept empty elements? (otherwise it breaks code)
Check a Previous Question Sub Application Pause Menu, How do I make a Pause Menu? (has examples)
otherwise quick ways are dialogbox, Question & Answer objects they pause the app while displayed.
thanx Lukiester for the idea but i think ill try and shortcut it a bit and remove the ors
at the end of day I've come up with this
don't know if right because it plays up when putting in...
attached is a screenshot of the example
just doesn't work right why?
I seem to run into problems frequently with extensions not working and it comes down to DirectX.
Is there any documentation on whats not going to work with directx?
any SQLite 3 and Pro Unicode Version yet?
If i create a database with SQlite or SQLITE PRO object and execute this sql entry
CREATE TABLE formats ( Format_ID INTEGER NOT NULL, Language_ID INTEGER NOT NULL, Name VARCHAR(120), Description...
has anyone got a download?
Don't forget "Execute in Console" Object can do more.
Man i would be pulling my hair out trying to figure this one out, Marbenx thanks a bunch for your fix;).
still Clickteam weird this is, you would think the ball would collided with the boundry of...
I'm getting a weird collision with the ball with a invisible slope whats could be happening?
make a active object edit it and select walking (or others) from "animations" dropdown see that it hasnt have a animation frame made yet and right click the frame plane select "new frame" nothing...
how do get stdout directly to a Alterable String from the "execute in console" object?
I ended up using the "Image Manipulator" Object to load and save it to 3.jpg the colors have changed and also i changed the transparent color in the active picture from black to white to stop image...
can i convert it within fusion?
i couldn't see 1.jpg in the active picture object (i can view it in explorer or a picture viewer like irfanview)
so i saved the image again as 2.jpg in irfanview
i have made a example of the 2...
set into event editor
* Button (Button Object) Clicked
- (Edit Box 2) : Set Text : Evaluate$( "ExpEval Object", Edittext$( "Edit Box" ) )
run the application
Paste into editbox
Since there's no documentation On the "List & Set object II" im stabing in the dark:(
But List & Set Object II just crashes app when putting List content into List 2.
I've tried 2 ways still...
Im assuming your talking about moving the cursor (caret) position to the end of the Edit box, if that's what you talking about there's a extension called edit box: selection by looki that will help...
There is a unicode character crosshair just getting to show as a string is a another story
but any how about using a font? (there's a lot of differant custom fonts choose from on the web)
like in title "fire events N times after given delay" how do you stop it when the event is already triggered?:o
just a quick rundown on the method used by using "richedit object" to load the ascii.txt file and select the characters 0 to 1, 1 to 2 ect. then in a fastloop and entered them into the array object...
i made a quick and dirty example someone maybe able to explain better for you, i did have a prob with the 1st # in the loading in the array not sure what i did wrong, but i hope it helps.;D
how can i webscrape on android when i can't use the richedit object?
I havn't found a solution yet but i was able to use curl (through the console object) to post the jpg (curl.exe -F "firstname.lastname@example.org" https://blah/blah.com/upload)
Tip: If you would like pretty icons like under me Profile name posts) access https://community.clickteam.com/passport and register your click products and it shows what clickteam products your using...
using the binary and get objects
i try to post a jpg file binary and get only a few chars of the file sent
ADD postdata "image" = string$( "Binary object", 0, size( "Binary object" ) )
is there a page i can go to that lists all previous releases (logs) to see what has change since then?
that will be now
Wow! i never thought of that danny and very good explanation;D, that's better than what i was doing mucking with ICACLS to create a log of a admin folder and managed to stuff up my main drive file...
why not use Substring Replace object ;) I'm assuming your using MMF2?
ReplaceSubstring$( "Substring Replace", Edittext$( "Edit Box" ), " ", "+" )
place a created app in a administrator privileged folder, now how i get the app to know if it needs admin privilege's because its in a administrative Privileged folder?
Any way to call a dll in ctf? i heard the old mmf2 extension dont work in ctf.
Id love to use bass.dll:D
another example is Mid$(CommandLine$, 1, Len(CommandLine$) - 3)
but is there a extension can get true path/fillename of the application without modification?
Appdrive$ + Appdir$ + Appname$ + ".exe"
as you see I've completed the application filename path except for putting in .exe on the end
how do i set a string with the full filename?
anyone got a example to tell the differance with the "user" selecting a line and a "event by a button" selecting a line in a combo box?
After loading the cloudflare dependent site in webview
added the custom header to get object
"User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR...
has this been fixed?
seem no user set/get user agent at all.
its just that webview wont set or show useragent (cant see anything)
how do i receive cloudflares cookie to access a website with get object?
i understand this much
cloudflare needs to get js math parsed to get the jschl_answer
I'm not sure on how to, so i've used...
using "2 String Parsers, "base64 object",...
I'm still not sure what url policy flags i need to turn on or off just to many to muck with.
So i have found a workaround by putting a polyfill at the start of my code at least now the web control...
String parser 2 "get number of elements" returns 1 if there is not a match
I followed instructions here
Big thanks LB:D
Wow! nice example Casleziro;)
i created a fast loop example out of yours push button and sets each string object with a random number
it took me a bit to find the "for each object" action, i...
if i set a couple of string objects with numbered names eg.
test1 test2 test3 and a use a editbox for input for string variables of those string objects
how can i call test(value) without...
which will be the "url action flag" i need?, i've turned on "allow active content to run in files on my computer" in internet explorer that seems to sort itself but still getting the foreach error in...
heres my example 24399
the webpage loads up normally with google chrome
but if i use the web control object all i get is error "Object doesn’t support property or method ‘forEach’"
(if im not...
how can i get to this page or someone got way there i need a file search example with list object.
i got somewhere with
SelStart( "Edit Box: Selection", 1 )
SelEnd( "Edit Box: Selection", 1)
took a bit looking around but i saw this post and then it makes sense now
I'm supposed to "Retrieve...
its called "EditBox: Selection" im still trying to figure out from it
SelStart( "Edit Box: Selection", 1 )
SelEnd( "Edit Box: Selection", 1 )
seems to do nothing.
I know i'm able to "get caret position" with the RichEdit object but how can i do it with the EditBox object?
and if not would it be hard to implement?
i did however was able to decrypt letters 1 by 1 and not numbers through a couple of conditions and fast loops
its messy but it did work.
Well done! you've combined the "disable menu option new" for both editbox and richedit objects into 1 condition line and it works as it should now, thank you DecalX)
how do i stop xables caesar decrypting numbers in the string?
DecryptSafeCaesarCipher( "Xable Crypt. Object", "kiqvqdgfcv12covjgpigvwrcv9co", 2 )
and is there a object that can detect a type of...
hey, thanks danny set me straight i been using the get object for a long time i could'nt use https way back then so ive been using http on all my requests i did'nt notice that until now. its really...
so ever https for get object?
I have a example attached of when selecting text in the editbox or the richedit object the menu option "new" will be enabled, if no text is selected then its disabled.:)
I'm having trouble :O with...
when i use the expressions below and paste them into notepad++
i get from both CRLF whats happening?
left$(newline$,1) // Line feed
right$(newline$,1) // Carriage return
the file object displays string of a root directory like "c:\" but if u get a directory u get "c:\some folder" with no "\" on end
how to make set a string in one event auto put in the "\" on end...
it's quite easy, see your windows task manager find a file that's running then use the filename to input in the event editor just be careful what you kill unknown processes if your not familar with...
is event condition id (line) recorded in a mfa or is it read out in ctf in order?
id like to get the current condition line and set it to a counter if its possible or is there another way?
see image circled when test app alterable does not change and event 4 wont work, why?
thankyou works well.;D
how do i get a dword value from a hexadecimal (0x21) ?
Hex$(33) = 00000021
if i cant do that, can i at least lead a bunch of zeros to make up the length of 8 characters what extension can...
i noticed that when App runtime options set to Display Mode:Direct3d the pixel object does'nt function properly especially when getting color of a pixel on screen just comes up with 0.
why is this?
since richedit object cant be used in android whats a suitable object replacement for (Richedit Object action)control/find/ "Find and select text" and (Compare Two General Values Condition)...
example compare with ASCII.
need button ,ASCII ,Editbox and string.
Condition | Event
Button Clicked ...
i tweaked your example with runtime created ini files that seems to be the case when the space is ignored.
and also the ini object is doing something strange it seems to keep adding a...
ive noticed that aes encryption does'nt encrypt space(s) character at the end of a string
anything else do i have to look out for in the encryption?
This is obviously old but i found that dragging a link from chrome into the richedit object works.
Thanks for all your help Danny this information is invaluable for me password program.;)
i see reading the hash of the file to see if has been modified/changed.
thanks i didn't think of that:D
the ini entrys are stored like this in the file as example.
whats the best way to write in a ini entry with aesfusion and keep track to see if that entry is encrypted or not and at the same time keep that secret too? (this is so i don't re-encrypt whats there...
Well said, thanx for clearing it up. :)
where is this in the special object or is it only specific to a certain object?
is there a documenation on the common expressions?
ReplaceSubstring$( "Substring Replace", "uu", NewLine$, "¶" )
returns as a single u?
i was mucking around today with the Get as ArRay Object trying to get a webpage to load message received
using https://technet.microsoft.com/en-us/sysinternals/bb842062.aspx for the url
how do i decode HTML entities (Entity number) quickly in CF?
"that's all Folks!"
doing this with a counter set to 100
( value( "Counter" ) * 1.0 / 180 ) * 90
equals to 50
i found using * 1.0 worked well (i couldn't use + ".0" on end of a counter)
I've been playing around...
Set Alterable string of "string 1" to string$( "String 6" )
id like to do this instead string$( "String " + Str$( value( "Counter" ) ) )
i know this does'nt work but is there a way?
thanks for clearing that up for me schrodinger.
I've changed my first example now its complete and works (not in the OP though) , also i changed the counters (timers) to seconds using the timer...
Wow your right schrodinger, i switched line 3rd and 4th eventline around it works as it should :)
still i dont really understand why, but is the...
it makes no differance when i take out the two "stop fastloop" still reads out the same.
Im wondering if fastloops are too fast to notice the differance of a changed character in the richedit object
(made up another simpler example)
my problem is the Fastloop way needs to find and...
i have a example of a
fastloop verses alterable by finding a character in the richedit object say r and replace the selection with t
ive seem to mucked up the fastloop side keeps going when it...
Thanks for that anyway, i didnt know that a simple question was gonna cross boundrys into forbidden coding.
u dont know me, so dont label me as such
i was asking this because i had to copy the web address from chrome and then paste the url into my app , i was tryiing to shortcut it so i didnt have to...
Yep, thats right
how can i get my CF app to ask for the url of a opened web browser? say google chrome.
how easy is it to decode a url?
my way i put all the codes in a list object and search and replace each match in richedit object
there a easier way? (example file would be good)
to save some confusion this is the layout im talking about
this will work in mmf2 but try exactly the same thing in clickteam fusion it doesnt work.
I had experianced a CTF differance compared to mmf2 that took me for a loop today in using the "Execute a external Program" in special object
"Execute a external Program"
"with a evaluated...
Thankyou chris for that piece of info im definatly gonna need them.:D
Im sure this will be fixed in ctfusion hopefully, in mmf2 you could load yer file into the richedit object with no probs.
ive tried this exactly as described doesnt show all the ascii characters only shows first few chars (mp3 loaded into the richedit object)
but i have found in part work around...
Alt codes carriage return and line feed not working in expression editor why?
seems i can only use NewLine$
Ive seem to got what i wanted after heaps of searching and experimentation :O
i simply added POST data (doesnt seem to matter whats contents i typed in "hello" and value "") and then GET URL
document.cookie="username=John Doe; expires=Thu, 18 Dec 2013 12:00:00 UTC";
and i get nothing back
how do i call for a cookie for a website using the Get object?
Sorry, lost me at x i want to be able to log each of the numbered line events activated at runtime.
as can see in screenshot of event editor the event ids in red circles
say if line 1...
how can i log event ID's easily into the list object using the always condition?
only one action when event loops = list object, add a line, event (line) id
when i put alt+010 into rich edit objects box i checked the result with a Counter and ASCII Object chr2int( "ASCII", GetSelection$( "Rich Edit Object" )) to get 13 instead of 10 why?
is this what your talking about
Alterable Value A( "Active" )+1 OR value( "Counter" )+1
i created a simple example hope it helps 15107
always set position ememy paddle's Y to Y of Ball (no need for set movement there)
my example mfa 15018
has a problem i cant get past my app creating incretment files of a random k file created where is it coming from?
creates like in the data folder of the mfa
Thought id share this with all MMF2 and Clickteam Fusion users
I've found that "Listary" is a great addition to searching in windows, but also found out it has more to it than i first thought, it...
has something to do with me html why it wont be seen.
this is the contents of file:///C:/Users/XXXXXX/Desktop/jwplayer.html as example
i cant get the local html file on me pc to load in activex microsoft web browser
i looked at ie it says "restricted this webpage from running scripts or activex" "allow content"
ive also ticked...
Whoaa!:O something i did'nt know very well done, Thankyou very much prester and ProdigyX you really nailed it. ;D
cant seem to "get" contents url like for example
i get nothing back from it
1.which mmf object displays the ascii extended characters ╩╦╔ and so on
2.using control X how can i simulate a alt code?
why i want to create a ascii shortcut program to click to enter each...
3089056.0 / 1024 = 3016.66
seems to work little better
but why do we have to use .0 on the end to force mmf2 to calculate this way?
why does in mmf2 counter calculation 3089056/1024 = 3016
and windows calc 3089056/1024 = 3016.65625
whats with the point, does mmf2 know it?
Finally found it after a lot of searching. :cool:
ive searched the web to find izzysofts dmc2 103 activex object where can i download it?
( ive tried freeware sites like cnet and others are otherwise they incomplete zips or pointing back to...
oh and its on windows xp sp3 where im doing this, i soon gotta try it on vista.
why do i get this error about 4 times when running a compiled mmf2 exe
Windows - no disk
Exception Processing Message c000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c...
is there a transparancy color in the activex directshow?
that's not good.
can put a picture overtop of the directshow object as a frame?
the Service Manager Extension
is a google away
"Allows you to create, delete, run and stop services. ALPHA."
hav'nt many people heard of this?
how can i know that the service stopped successfully?
without having to go to the admin tools
cant find a event service that didnt stop successfully is there a way to put it in a string?
(while in runtime) what im trying to do is to create a active object with a string val A "hello" and then create another of the same object with its string val A "there!".
then ask for the strings...
i dont know how but can i create the same active object with storing differant alterable strings in it so each one will have its own set of strings (during runtime).
can i put a active objects (picture frame) into the animated picture object during runtime?
2. any read/write examples of using Sub groups of the ini++ object?
still really need to know how to set the transparant color for a animated picture object.
1. can i set the transparancy color in the animated picture object? (could in the alpha channel object but cant tile a picture)
2. any read/write examples of using groups of the ini++ object?
Is there any (stdrt and edrt) runtime commandline options?
any documentation on them?
can u make me a example file, Dynasoft thankyou.
im happy it is creating ideas too thank you. for your support people. ;)
Your correct LB.
id like to use a object's name to be put into a string. by the way of events
that would be manually puting the object name into the strings text your talking about?
are you saying there is no way of getting a objects name at all into text by actions or expressions?
i was wondering if i could get the unknown object name from qualifers?
see i have 3 string objects with the same qualifer as good
named: how, about, this.
List object has three lines in it
i see your point, man i feel silly :blush:
ill leave it at that.
thankyou for all your help dynasoft. :)
i find that question 1 is getting a bit confusing
so i should explain a bit better.
if a string object name is called 'someobject'
i want to call its name so i can "add a line"...
re-question 1. is there a extension that could put a name of a object into a string?
and answered no 2 ive neva used string tokenizer i have now, i could have saved myself heaps of time in the...
1.is there is a extension can get name of object and use the in expressions?
ini file set like
TOP_Windows_Title = 121,35,6 ;RGB
like to put the numbers into 3...
um "less or equal" and "greater or equal" work the same way with letters than numbers?
so it detects if a letter is higher than another?
i meant in a wildcard sort of way.
by using "the special object" / "convert string to number"
letters would become value of 0
it does help distinquish letters from numbers
thanks dynasoft. :)
Left$(List Select$( "List" ), 1)
"a" or "b" or "c" or "d" (up to z quicker way?)
what should i use in the condition
for unknown character to see if it matches to be a wildcard letter or wildcard number?
ill try to explain what i want to do
compare two values with char of unknown value or letters say
condition compare two general values
val(Left$(List Select$( "List" ), 1))
with just being...
id like to set the file location in the file object without using the "open file selector"
so i can use the FileSelReturn$( "File" ) condition
usually u go to actions
Can i set a file in the file object's memory? (as if a file was entered by the file selector)
can i skew a object like directshow (video) at all?
i was thinking that yesterday and i couldnt skew anything in the frame editor was it left out?
and can i do something to rotate the...
Norton is at it again, no suprise im glad i hav'nt got it anymore. norton has aways been a thorn to mmf i dont know how many times mmf has been flagged as virus over the times.
so it would seem that i cant do anything in the activated condition. without making a seperate condition to back it up. oh well.
thanks for the ideas.
can i do anything while in the bunch of actions to slow it up what Can I use?
condition: Button clicked "button 1"
action: change alterable string to "Coping file..."
action: file object copy file "file.avi"
why does the string only display afterwards? ive...
so far ive found that Zemana AntiLogger has a Anti-ClipboardLogger function in it.
Interesting way to search for files.
i still havnt had luck finding files with the search object
say there is a file in c:\mp3\simple plan.mp3
1 editbox, 1 button, 1 search object, 1 list
*start of frame
thanks again jax :cool:
thanks very much for sorting this out for me Jax
something simple as the way the alterable is ordered in the event
i keep this in mind in future because ive always had the nak of putting...
thanks for your comments LB ill keep that in mind.
had trouble trying to find the term for this
found that "Hyperlink aware" is best suited i think.
i was experimenting with windows apps edit boxes to see which ones can grab the link instead of thumbnail and see if there is a extension in mmf that would match it.
if i made a...
"automatic url detection" just gives text in richedit a link blue text and underlined
to make link acessable.
not grabbing a dragged pictured link. (just shows picture no link)
If i can drag...
found "auto detection of urls" enabled it and still getting a picture
instead of link
tried experiment 2
try to drag firefox pictured link to windows notepad and get the...
a example might help here, i cant find any link anything in the properties of richedit object i found "link 2.0" in events turn that on but that didnt change anything with the drag of the link still...
hmm it seems to be with firefox this prob
a image can be dragged n drop from firefox
in to the app window (added ok)
but not a link (negated symbol)
Can i drag and drop a link from firefox to mmf2 created app
normal drag n drop only drops the file image from pc's temp folder
what else can i use just to display a link as a string,
one thing that stuffed me up making a yu-gi-oh clone was the card flipping to hand and more cards in hand than normal.
so i gave up.
:blush: Oh sorry i read over your post to quick and didnt get the full details so i made a new example sorry for the mixup
the best i can do is "Compare two general values" by
SearchResultsCount( "Ini++" ) with 1 or higher value
to get anysence out of it.
heres a very basic example using the pinball movement and overlay redux object, but i havnt figured the swing movement someone else can help with that, and the overlay redux transperancy i havnt...
use "active object" properties \movement \ change static for bouncing ball
and get it to look at players ship in event editor
quick example here...
i thought id redo my last topic because it was all over the place plus i had my example alterable values around the wrong way, i come to conculsion that "On Results Found" is deceptive
ill explain a bit more here what the problem im havin search'n for text in the ini++ object comes back as found for a non existant entry.
im not sure whats going on.
the ini++ search is not worrking right for me can somebody check this zip for the prob
it seems to be normal for drag and drop scrolling to be slow
So no one noticed this at all and not got curious?
i know this is not a windows forum and i was wondering if anyone has noticed this?
Can anyone tell me how to speed up scrolling up and down a list in windows explorer while dragging a file, while draging up a list it goes 1 line at a time how can is speed this up? ive tried...
It doesnt help when i dont know how to make a form to submit.
whats best script to submit?
(2 ways url and html and really failed to send a simple image file to a search engine for search a...
ive been busy looking into htm code shortest ive come to is this
<form id="upload_form" method="post" action="http://www.tineye.com/search" enctype="multipart/form-data">
as i progress into this problem i find that it is a security issue of the web thats really stopping me from using url to upload.
never thought of that when i started this idea. but i havnt got...
i use firefox anyway thinking i could upload the image though the mozilla activex control though to the tineye website hmm.
i know still sloppy but what else can i do?