Search:

Type: Posts; User: SoftWarewolf; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. No that could help, but it takes a little bit of...

    No that could help, but it takes a little bit of time to load the picture, so i would have to check with the 'a picture is loaded' condition, i remember having trouble getting that condition to...
  2. Active Picture from URL position is off.

    I can't get an active picture loaded from url to always be at the same position.
    I need to have the hotspot in the middle and scale up or down the image loaded.

    What i currently do is i have a...
  3. edit: new beta released, i'll try that one. ...

    edit: new beta released, i'll try that one.

    292.8 just crashes immediately with no surface for me (but only on main project, not a blank new one, so may be related to some object)
    291.x have...
  4. For portrait mobile apps, i now use 1125x2048...

    For portrait mobile apps, i now use 1125x2048 window size with 1536x2436 frame size.
    Fit inside and adjust window size.
    This results in the following screen resolutions, which are optimized for iOS...
  5. Replies
    7
    Views
    2,047

    Yeah it's called adaptive icons, it's pretty easy...

    Yeah it's called adaptive icons, it's pretty easy to setup in android studio.
    https://developer.android.com/guide/practices/ui_guidelines/icon_design_adaptive

    You just make a background and a...
  6. Replies
    7
    Views
    654

    I am getting a ton of reports about the surface...

    I am getting a ton of reports about the surface crash, crash rate is now over 2% which is considered bad behavior by the Google Play console.
    Is there a way i can remedy this quickly?

    I left the...
  7. Replies
    184
    Views
    916,885

    Sticky: This is very interesting. I have already been...

    This is very interesting. I have already been building with Android Studio and Gradle for a while now, with some tricks and importing. If i install the update, can i still edit with Android Studio...
  8. Which object do you get the system time from?

    Which object do you get the system time from?
  9. Date and Time chrono doesn't run in background

    So with multitasking the obvious choice, and countdown timers on my menu, i really need to know for how long the app is minimized.
    On iOS this works great with the chrono (stop watch) on the date...
  10. Replies
    4
    Views
    682

    Thank you Fernando :) i got it working eventually...

    Thank you Fernando :) i got it working eventually with a fresh final project exported.
  11. Replies
    4
    Views
    682

    I made an extension for serving ads through...

    I made an extension for serving ads through aerserv. The test ads caused this problem, but when i mediate real ad networks those all work fine, so it might be alright. But if you have a code snippet...
  12. Replies
    4
    Views
    682

    Mouse and multiple touch issues

    I am messing around a bit with own extensions to implement different SDK's, so this might not be a general problem, but i suspect it could be.

    When i show another view (display ad f.ex) and return...
  13. I also noticed the ghosting issue with display...

    I also noticed the ghosting issue with display mode: OpenGL ES 1.1
    Changing to OpenGL ES 3.0 fixed the problem.
  14. StatusBarHeight( "iOS Plus Object" ) returns 0 on...

    StatusBarHeight( "iOS Plus Object" ) returns 0 on both my iPhone's (X and 5s) even tho the status bar is clearly visible.
  15. I can confirm the same issues with the ios+...

    I can confirm the same issues with the ios+ object, it's a disappointment, but i won't fault clickteam or fusion for that.

    xcode with ios+: 25467

    edit: figured out how to fix it:
    go to Build...
  16. Replies
    3
    Views
    1,126

    iosnotif unofficial

    Try this: 25445
    A while ago i made some quick changes to the old iOSNotif extension by Timothy Ellis, hope he doesn't mind. I belive i got it to work, but don't remember the complete procedure. Need...
  17. Replacing edif extension, match the same identifier?

    So i made a couple small extensions recently. Mainly made for android, the windows versions doesn't do anything but has an empty shell with all the functions etc.

    For some reason these last 2...
  18. Is it possible to compile fusion projects with...

    Is it possible to compile fusion projects with gradle instead of ANT?
  19. Replies
    37
    Views
    11,101

    Honestly i haven't been working much on it since...

    Honestly i haven't been working much on it since i got caught up in other things, sorry.
    Not sure when fusion 3 is due now, but it's plausible i won't have an extension i feel is good enough quality...
  20. My "NeW" multiplayer object works with android...

    My "NeW" multiplayer object works with android and html5, it's very similar to lacewing with some extra features (cloud data storage), and made from scratch using websockets and nodejs back-end.
    I...
  21. Replies
    28
    Views
    7,391

    +1 Fusion apps needs to be able to scale to the...

    +1
    Fusion apps needs to be able to scale to the whole screen on all devices, and the safe and margin x,y positions should be retrievable.
  22. Replies
    11
    Views
    2,624

    All movements must use timecalc (milliseconds...

    All movements must use timecalc (milliseconds since last frame) or loops.
    f.ex if you are doing something that has to do with time or movements and your standard framerate is 50, then when the...
  23. Replies
    11
    Views
    2,624

    I made at least one game frame rate independent,...

    I made at least one game frame rate independent, basically you'll use the timer value to calculate all changes/movements between frames.
    timecalc = timer this frame - timer last frame. Recommend...
  24. Chartboost screen freeze on specific app

    What happens is whenever a chartboost ad is shown, the screen won't recognize any taps, so you can't click or close the ad.
    The issue is resolved by pressing the android back-button, it's like there...
  25. Replies
    37
    Views
    11,101

    Oh yeah sorry, haven't made much progress lately,...

    Oh yeah sorry, haven't made much progress lately, i was also really excited but got stuck on some iOS bugs then got distracted by other things for a while. I'll get back to it soon, but can't promise...
  26. Replies
    27
    Views
    4,506

    I also think it's a little bit intrusive that all...

    I also think it's a little bit intrusive that all extensions just keep adding permissions instead of using the built in permissions list in fusion.
    It would be much more convenient if when adding an...
  27. Replies
    2
    Views
    677

    I see it's possible to take a picture and save...

    I see it's possible to take a picture and save it, but i would just like to save a photo which is included using binary data.
    Perhaps extract binary data and use file object?
  28. Replies
    2
    Views
    677

    Save file to camera pictures?

    Is there a built-in way or extension that allows to save a picture file (included with binary data f.ex) to the camera/photo directory?
    Interested in both iOS and Android.
  29. Replies
    27
    Views
    4,506

    It's possible to modify the android source code,...

    It's possible to modify the android source code, but it's a bit complicated.
    When you build, fusion makes a folder in your temp directory, if you can snag it out (it's deleted automatically after...
  30. Replies
    16
    Views
    3,097

    I am seeing a major problem on one of my apps,...

    I am seeing a major problem on one of my apps, sometimes after a chartboost ad no touches will register, you can't even click or close the ad.
    Only option is to use the back button, can't release...
  31. Replies
    2
    Views
    1,402

    I would guess this on line 514 of...

    I would guess this on line 514 of CRunGetThread.java is the problem:
    @Override
    public boolean verify(String s, SSLSession sslSession) {
    return true;
    }
  32. Replies
    2
    Views
    1,402

    Insecure Hostname Verifier (288.0)

    I just uploaded an app yesterday and got this warning on the developer console:

    ---
    Your app is using an unsafe implementation of HostnameVerifier. Please see this Google Help Center article for...
  33. Maybe if the latest version was on the clickstore...

    Maybe if the latest version was on the clickstore it would work correctly.
    Is there any version after V14?
    On clickstore it says v12 but downloads v13, i accidentally downgraded but found a...
  34. day calculation between months etc can be a bit...

    day calculation between months etc can be a bit tricky, it's easier if you only check if the day is different and do your thing after launching your app on multiple different days:

    do this:
    start...
  35. Replies
    4
    Views
    1,174

    straight to google play:...

    straight to google play: "market://details?id=your.app.id"
  36. Replies
    37
    Views
    11,101

    The server is built on NodeJS javascript, i run...

    The server is built on NodeJS javascript, i run it on a VPS with NodeJS and the following NPM packages:
    - ws (websockets)
    - mysql
    - microbuffer
    - collections/set
    - collections/map

    Also a...
  37. Lots of ways you could do this, could have a...

    Lots of ways you could do this, could have a bonus which gradually goes down on either each question or the whole thing.
    F.ex just set a value to the maximum amount of points for each question,...
  38. Replies
    37
    Views
    11,101

    Yeah it works great. Html5 is complete, server is...

    Yeah it works great. Html5 is complete, server is running stable. Both Android and iOS are pretty much done as well!, but need more testing to find bugs and then fix them.
    I am working on my main...
  39. Yeah i ended up using an additional event. The...

    Yeah i ended up using an additional event.
    The reason you would see it with always is because its updated on the next frame-tick, if you set the counter to 0 first then it stays 0.
    Triggered events...
  40. For each loop behaving differently than regular loop

    Can someone explain what is going on here?
    22115

    When i do a loop 3 times adding 1 to counter it will be set correctly to 3 afterwards in the same condition.
    If i do a loop on 3 objects adding 1...
  41. https makes communcation between the user and...

    https makes communcation between the user and server secure by making sure nobody else is listening in between the two, but both the user and server have access to it. So the user/client could still...
  42. Get requests can be listened in on, the user can...

    Get requests can be listened in on, the user can read the content both ways and make their own get requests. Generally you should never trust the client, which in this case is the whole html5 app...
  43. You really need to access a database with a...

    You really need to access a database with a server-side script for security reasons. You could do it with javascript and call functions with the html5 object, but this is extremely insecure as anyone...
  44. Anything is theoretically possible with...

    Anything is theoretically possible with extensions, there is a java and also android implementation already available: https://github.com/rmtheis/tess-two
    Still likely to be a bit of work tho, how...
  45. Replies
    37
    Views
    11,101

    Haven't tried a heavy stress-test yet, but using...

    Haven't tried a heavy stress-test yet, but using single bytes/shorts in a few places, so at most 255 players per room, and about 65,000 on the server in total. Likely something else limiting it...
  46. Replies
    37
    Views
    11,101

    NeW Multiplayer extension (in development)

    I am creating a new Multiplayer object, the server runs on NodeJS and standard Websocket (RFC-6455) hence the name "NeW", i was thinking "e" for "express", but i am not using that after all.
    So far...
  47. If the objects don't move it would be much better...

    If the objects don't move it would be much better to just store the id's of the removed objects, but your way of storing the coordinates with array sounds like it should work, post an example?
    Maybe...
  48. hehe, yeah probably a mmf workaround, pretty...

    hehe, yeah probably a mmf workaround, pretty small one tho :)
    in "proper coding" you would definitely need a ton of values and flags for everything anyway, so fusion is a great place to start...
  49. Yeah exactly, do something like this: 21898 ...

    Yeah exactly, do something like this:
    21898

    then "press enter" only does one action at a time.
  50. Replies
    9
    Views
    1,386

    I have given up on waiting for updates to...

    I have given up on waiting for updates to lacewing with more cross-platform compatibility. (iOS)
    And honestly the object is a bit of a dinosaur, with no updates in past 5 years.
    So i am giving it a...
  51. Try this: When you press enter - set flag 0 on...

    Try this:
    When you press enter - set flag 0 on (on some object)
    Then replace the press enter condition with "flag 0 on" and use an action to set flag 0 off.
    This way you'll make sure pressing...
  52. Replies
    3
    Views
    1,192

    This is a typical object picking issue, use for...

    This is a typical object picking issue, use for each loops to do something in relation to each object specifically.
    The path movement might not be the best option to use, i changed it to something...
  53. Didn't really take a good look, but i don't think...

    Didn't really take a good look, but i don't think the "collision between" condition work on loops. Generally all triggered events (marked by a different color) has to be the first condition on an...
  54. Replies
    22
    Views
    3,600

    Really great example :) is it fully compatible...

    Really great example :) is it fully compatible with other runtimes? (ios/android) i tried to do the same thing, but used "replace color" and ran into issues.
    Edit: tested on Android, works...
  55. Just use an event for each sound :P Even a...

    Just use an event for each sound :P Even a hundred sounds should only take 10-20min to set up.
    If it's only one sound at a time then you can set a value, or if you need overlapping sounds then set a...
  56. Replies
    8
    Views
    1,750

    The find command could also be made a lot more...

    The find command could also be made a lot more useful, i would love to be able to find which events are changing a specific value, f.ex if you name an alterable value and search for it, you should...
  57. Replies
    7
    Views
    4,292

    20k is the payment threshold (minimum) there is...

    20k is the payment threshold (minimum) there is no cap/limit.
    It will be extremely hard for someone else to make a game that fits into our ecosystem, mainly there is a ton of back-end development to...
  58. Replies
    7
    Views
    4,292

    Well on average we give away a bit less than we...

    Well on average we give away a bit less than we earn from the ads, so you would probably make more putting ads in your own game and just play it by yourself :P Especially since a lot of our traffic...
  59. Replies
    7
    Views
    4,292

    No website to register on for our apps, you would...

    No website to register on for our apps, you would have to just copy-paste it.
    Tap the first sign-in/register option, it will ask for an email adr, and then your bitcoin wallet.
    If you are already...
  60. Replies
    7
    Views
    4,292

    Alien Run - Free Bitcoin (iOS/Android)

    So a while ago i teamed up with the guy behind Bitcoin Aliens, a popular Bitcoin Faucet - basically just a website that gives you a microscopic bit of free money to visit the site and see some ads....
  61. As mentioned Array and Get are really core...

    As mentioned Array and Get are really core extensions that i am sure will be available in fusion 3.
    Also string parser, multiple touch, date and time, most of their functionality could probably be...
  62. Replies
    3
    Views
    1,194

    Not within fusion, but when making an extension....

    Not within fusion, but when making an extension. The objects are recreated every frame, so i am wondering if there is a trick to make it global, or where i would store a pointer globally in the...
  63. Replies
    3
    Views
    1,194

    How to make an extension global?

    I have a problem with the iOS version of my extension, it seems the variables are cleared between frames, this does not happen in the android version for some reason.
    Is there any simple trick to...
  64. Why not just use the android gps? you can get it...

    Why not just use the android gps? you can get it with the "android google maps" object at least.
    Might be possible to run html code with the web view object, haven't used it much but looks like...
  65. Replies
    2
    Views
    755

    The icon displays just fine on settings and other...

    The icon displays just fine on settings and other menu's without adding them.
    I believe they are optional to get the scale pixel perfect on those locations, but not required.
  66. 3. The squeeze option was possible before with...

    3. The squeeze option was possible before with admob, but used to be built in, i am actually not sure if the option is still there with the extension, check the current frame and object settings, and...
  67. Replies
    4
    Views
    1,438

    Welcome :) there is a lot of info around if you...

    Welcome :) there is a lot of info around if you search a bit.

    Posted some info on the fit inside and fit outside settings here:...
  68. Replies
    141
    Views
    22,801

    This deal is insane! 15$ includes developer now??...

    This deal is insane! 15$ includes developer now?? feel a little bit cheated since i got all of it at much higher cost, but it's awesome if it brings more people to the community.
    Already got dev and...
  69. This is when testing on windows runtime / within...

    This is when testing on windows runtime / within fusion? post the .mfa so we can have a look.
  70. Yeah i completely get the frustration, sometimes...

    Yeah i completely get the frustration, sometimes there is a bug on a runtime where it's hard to isolate the cause, and it's easy to blame the development tool.
    Here are a couple tricks to prevent...
  71. Great example schrodinger, didn't know distance...

    Great example schrodinger, didn't know distance was a built in feature now :) and enjoyable to watch it run.
  72. Replies
    4
    Views
    1,575

    That's spot on what it does ;)

    That's spot on what it does ;)
  73. Replies
    4
    Views
    1,575

    How about this way? 21131 I used the String...

    How about this way? 21131
    I used the String Tokenizer object.
  74. Replies
    3
    Views
    1,932

    That would be a very long tutorial, but it does...

    That would be a very long tutorial, but it does work, f.ex: http://www.gameyey.com/play/fbogreenred

    Probably a good idea to test with a public server, i don't know if dark-wire public server has...
  75. I use the array object for my data and never had...

    I use the array object for my data and never had a problem.
    save and load array file to/from: DataStorageDirectory$( "Android object" ) + "/filename.filetype" (any file extension is okey) [on iOS...
  76. Replies
    201
    Views
    22,669

    The cache should work between frames, meaning if...

    The cache should work between frames, meaning if you cache an ad on frame 1, it should be available on frame 2.
    It shouldn't crash your application if you cache it again tho.

    You need to cache...
  77. Replies
    0
    Views
    502

    Can't display List on iOS?

    I wonder if i am missing something, but the list object doesn't display at all?

    test:
    put list object in frame (default settings)
    add some lines
    run on iPhone

    result:
    nothing displayed
  78. Replies
    3
    Views
    1,932

    The server needs to support it, i don't think...

    The server needs to support it, i don't think running an .exe with the server extension works. If you are running your own pylacewing server you need to run the flash policy server, i believe it's...
  79. Replies
    7
    Views
    1,216

    The action is "start application" where you just...

    The action is "start application" where you just put the package name "com.varagtp.tapheroes_f" then it will launch the app directly if it's installed, and if it's not installed it will open up the...
  80. Yeah you can use the "Date & Time" object to get...

    Yeah you can use the "Date & Time" object to get the current date and time :) unfortunately there is a bit of calculation required to convert this to time passed.
    If you want it to do it a bit...
  81. Replies
    7
    Views
    1,216

    I've done the tweak for you, just haven't tested...

    I've done the tweak for you, just haven't tested it.
    The first link is to the regular version, (extension+runtime) and the second link is to just the tweaked runtime, so after installing the...
  82. If your expression actually says random(1-7) it's...

    If your expression actually says random(1-7) it's going to do random(-6) which doesn't work. Random doesn't take two variables, if you want random between 1-7 you'll have to do: random(7)+1
  83. I was surprised it worked as well as it did...

    I was surprised it worked as well as it did without clearly separated ID's
    I added id's and loops to make this work properly: 21004

    The counters now have bouncing ball movement to allow comparing...
  84. Replies
    8
    Views
    1,944

    Appreciate that you noticed =) link:...

    Appreciate that you noticed =)
    link: http://community.clickteam.com/threads/98167-Pruned-Google-Play-services

    Just backup the GooglePlayServices.zip under runtime\android and replace it with my...
  85. Replies
    5
    Views
    1,123

    I recommend obfuscating the values, as local...

    I recommend obfuscating the values, as local encryption can easily be broken.
    There is no problem sending the values in clear text if you include a verification string, just use a bunch of different...
  86. Replies
    7
    Views
    1,216

    Try with my object:...

    Try with my object: http://community.clickteam.com/threads/93334-My-first-extension!-Android-quot-AppInstalled-quot-check-if-an-app-is-installed
    I believe this is the correct version: 21000

    It...
  87. Replies
    4
    Views
    845

    You can do post (or get) with the get object,...

    You can do post (or get) with the get object, it's very straightforward to read with a php file on the server side, then you can look into storing the data in an sql database, send email, or whatever...
  88. Just do this: ALWAYS - Set Alterable Value A...

    Just do this:

    ALWAYS - Set Alterable Value A for Hole to 0.
    If "Blood" is overlapping "Hole"---- Set Alterable Value A for Hole to 1.

    In that order.

    Then the value will be 1 if it's...
  89. Replies
    2
    Views
    794

    You'll need to make this, and it's a bit...

    You'll need to make this, and it's a bit complicated.

    you could do something like this:

    when you collect a new resource, add a character to represent it on an alterable string.
    f.ex "1" =...
  90. If you use this quick object i made, it will...

    If you use this quick object i made, it will launch google play page if the app is not installed, and if the app is installed it will launch the app directly...
  91. Replies
    3
    Views
    1,317

    Would need to store the value somehow, and you...

    Would need to store the value somehow, and you would need your own server for this.
    If you are using the lacewing server object as server, you could just send a message to server to add the click,...
  92. Replies
    2
    Views
    642

    Use the "fit inside and adjust window mode"...

    Use the "fit inside and adjust window mode" option, i just explained it here: http://community.clickteam.com/threads/98210-Fit-Outside-not-scaling-correctly
  93. Replies
    2
    Views
    768

    I have a more complicated system, it could handle...

    I have a more complicated system, it could handle multiple requests simultaneously, not sure if the extension does tho.
    But using a global or alterable string as a buffer before tokenizing would...
  94. Replies
    6
    Views
    1,325

    Yeah buggy simulator :) just zoom out: simulator...

    Yeah buggy simulator :) just zoom out: simulator -> window -> scale (50 or 25%)
  95. Replies
    6
    Views
    1,325

    It's pretty straight forward, and i haven't seen...

    It's pretty straight forward, and i haven't seen any issues or differences with ios/droid.
    With fit inside and adjust window size, you can at least be safe that what you need to be displayed will be...
  96. Replies
    6
    Views
    1,426

    Sounds awesome, with up to 500 players and 20gb...

    Sounds awesome, with up to 500 players and 20gb for free. I'll take a look :)
  97. Replies
    6
    Views
    1,325

    You definitely want the "fit inside and adjust...

    You definitely want the "fit inside and adjust window size" display mode.

    "Fit outside":
    [The window X and Y are the MAXIMUM size of each.] -> window shrinks until only one of x,y are fully...
  98. Replies
    2
    Views
    768

    EXC_BAD_ACCESS every time from xcode

    (solved'ish)
    EDIT: just figured that the .php i was getting didn't work, fixing the script fixed the error. It probably shouldn't crash because of that, but it works fine now.

    I get this error...
  99. Replies
    0
    Views
    513

    Pruned Google Play services

    I deleted a lot of stuff from the google play services library and it still seems to work fine with ironsource, increasing the amount of different ad networks you can add.
    Uploaded here:...
  100. I got the same message on an old app, i am...

    I got the same message on an old app, i am guessing it's been fixed since then. When did you last update the app you got the warning on?
  101. Replies
    6
    Views
    1,744

    The clickstore listing costs 24.99$ but it says...

    The clickstore listing costs 24.99$ but it says it should be a promotion for 19.99$? Any chanse i could get a further discount since i made the unofficial version and can be helpful sorting out...
  102. I have done more testing and added: run this...

    I have done more testing and added: run this event once - set frame rate to 120
    This doesn't have any effect, restarting the frame still does not restore the framerate.

    But minimizing and...
  103. Android framerate gets stuck when it drops.

    So i am making a game with variable framerate (just set to 120fps) so it will run on whatever speed the device can handle.
    I noticed for my lame old phone it only goes to about 45fps and the newer...
  104. I am still confused which version is better, all...

    I am still confused which version is better, all 3 seems to work alright on my test devices, but what is the actual advantage of each when just releasing your app on google play? not caring about any...
  105. An iOS port of google play multiplayer could be...

    An iOS port of google play multiplayer could be an option too, or preferably make something new based on f.ex libuv/node.js which games like agar.io uses. If i get some time i may attempt to make...
  106. I would definitely use "Fit inside and adjust...

    I would definitely use "Fit inside and adjust window size" option, 1080p might be a bit heavy, you could do 720p with extended sides.
    Just do 720x1024 window size with 768x1280 frame size for a...
  107. Why not update all the way to 9.2.0? it's now...

    Why not update all the way to 9.2.0? it's now split into separate packages, so you should be able to get away with a much smaller filesize. For ad networks you can just use "play-services-ads" and...
  108. Many years since i used more than a couple frames...

    Many years since i used more than a couple frames in my games, always a single game frame loading levels, either by random generation or from data made by a level editor. I now also started making...
  109. Agreed. And i am just now making my first...

    Agreed.
    And i am just now making my first framerate independent game, it's very tricky handling every event by how many milliseconds passed since last frame, but it does work a lot smoother.
    My new...
  110. I believe Android and iOS are the most important....

    I believe Android and iOS are the most important. Still looking forward to the day we can see true cross-platform multiplayer with fusion. It's a bit ridiculous that the old lacewing from over 5...
  111. Replies
    201
    Views
    22,669

    This is very interesting to see! i made the...

    This is very interesting to see! i made the unofficial version for myself which i must have been using for about a year now.
    I had a lot of trouble adding the latest version of UnityAds with my own...
  112. Replies
    16
    Views
    5,465

    Well it's been a year now.. any progress?

    Well it's been a year now.. any progress?
  113. Replies
    11
    Views
    1,731

    If you want to detect every touch with the...

    If you want to detect every touch with the mouseclick events you'll just need to copy it twice, one for single click and one for double click.
    But in my latest game which is very fast-paced, i feel...
  114. Replies
    35
    Views
    4,881

    oh, it's not in extension manager? don't...

    oh, it's not in extension manager?
    don't remember where i found it, but now i've uploaded it here:
    20387

    no example, but should be pretty straight forward, i believe it still works just fine =)
  115. Replies
    35
    Views
    4,881

    There is an iOS notification object too! it was...

    There is an iOS notification object too! it was working great last time i used it :) And it has the added bonus of setting a notification by seconds in the future, while on android you need to use...
  116. oh! that actually worked, great thanks :) i'll...

    oh! that actually worked, great thanks :) i'll see if i can shuffle it around in my game the same way, there's obviously a lot more to consider there.
    edit: MuddyMole's workaround must be what i...
  117. Replies
    35
    Views
    4,881

    The id just have to be unique for each app, if...

    The id just have to be unique for each app, if you have two different apps with the same id it's going to cause a ton of glitches.
    You can only set notifications to be displayed for a certain time,...
  118. Bad collision detection of objects moving simultaneously

    Please see attached example: 20322

    My game uses xpos,ypos alterable values on all objects for smooth custom movements and scrolling.
    I am having a big problem with overlap-collisions being...
  119. Replies
    201
    Views
    22,669

    Hey, yeah i've been using supersonic (now...

    Hey, yeah i've been using supersonic (now IronSource) for a while with a custom extension and some hacky-modification of the runtime.
    Now when the new fusion update is released i should be able to...
  120. I think i've seen that error when it's a...

    I think i've seen that error when it's a protected file. Before when exporting an .exe it came with an external source file which can't be opened.
  121. Replies
    13
    Views
    2,549

    I would use array object(s), but it's a big task...

    I would use array object(s), but it's a big task to efficiently store all that data and restore the game state properly.
  122. Major issue with latest Chartboost object (285.2)

    There seems to be a terrible flaw in the new version of the chartboost object. I have updated two games, and shortly after the eCPM makes a sudden and sharp drop.

    The last game updated april16...
  123. Android plus object - on app return from pause

    Android plus object - on app return from pause
  124. Replies
    10
    Views
    4,115

    It can be any size i think, i usually use...

    It can be any size i think, i usually use 144x144. rather have it scale down than scale up.
  125. Replies
    3
    Views
    1,845

    Sounds pretty good, double-check the frameworks...

    Sounds pretty good, double-check the frameworks are added in xcode? https://answers.chartboost.com/hc/en-us/articles/201220095-Download-Integrate-the-Chartboost-SDK-for-iOS
    and obviously you have...
  126. Replies
    2
    Views
    823

    You should at least go from 4:3 to 16:9, also i...

    You should at least go from 4:3 to 16:9, also i believe some devices without physical buttons still display menu buttons on the bottom of the screen, so i would make it extra wide to be sure, maybe...
  127. Replies
    11
    Views
    2,169

    What i am doing is using the regular chartboost...

    What i am doing is using the regular chartboost and admob objects alongside the video mediation, (6 networks total) and manually prioritize chartboost because the average ecpm looks higher, even if...
  128. Replies
    11
    Views
    2,169

    I made an extension, so i have events for all of...

    I made an extension, so i have events for all of that. But it's not stand-alone/released public, as it requires a lot of modification.
    Live app:...
  129. Yeah it's a bit confusing that you recommend 2.0...

    Yeah it's a bit confusing that you recommend 2.0 when 3.0 supports more devices and most likely has other optimizations? or can the fusion runtime be slower with 3.0?
  130. Replies
    11
    Views
    2,169

    I have done this, i managed to implement...

    I have done this, i managed to implement supersonic ads: http://mbsy.co/cPdzJ
    Supports rewarded video ads from adcolony, unity ads, vungle, applovin etc.
    And also offerwall which generates really...
  131. Replies
    0
    Views
    917

    Flash version control / auto update

    Have anyone looked into a custom version control system for flash applications?
    Back in the mochi days, you could sandwich your game in a package that included their ad-preloader and version control...
  132. yeah permissions change sometimes, which is...

    yeah permissions change sometimes, which is annoying for updates.. like the wake_lock which was also added by something, i can remove it manually tho (but requires a lot of work).
  133. Please send me a copy if you can as well.

    Please send me a copy if you can as well.
  134. Having the same issue, glad to see it's being...

    Having the same issue, glad to see it's being resolved =)
  135. if you use both click and double click action it...

    if you use both click and double click action it will be equal, otherwise when tapping quickly it won't register each time, as some of them will be double clicks.
  136. Are you using multiple frames? i noticed some...

    Are you using multiple frames? i noticed some issues on android when trying to keep the connection between frames. Maybe upload an example?
  137. That's awesome, i never realized you could adjust...

    That's awesome, i never realized you could adjust the frequency.
  138. If you only use iAD (not chartboost or anything...

    If you only use iAD (not chartboost or anything else), you should probably select NO.

    google: "if you'r using only iAds to serve ads in you app and you'r not using any third party libraries like...
  139. Replies
    3
    Views
    1,017

    You can start another app with the AndroidPlus...

    You can start another app with the AndroidPlus object, or this extension:...
  140. I see, i heard someone got the same problem with...

    I see, i heard someone got the same problem with my other extension, i hope someone can help and tell me what i am doing wrong when generating the .mfx file.
    it could help if you get...
  141. Replies
    47
    Views
    8,247

    That does sound like an enormous difference, my...

    That does sound like an enormous difference, my apps are usually closer to something like 5mb on android and 15mb on ios f.ex.
    I would suspect the sounds and music, i wonder if perhaps .ogg is...
  142. What you mean by not recognized? any error when...

    What you mean by not recognized? any error when you start fusion or just not displayed on the extension list?
    Make sure you download with the last link i posted, at the top of this page, page 2, not...
  143. Yeah that's exactly what i meant, /MT was the...

    Yeah that's exactly what i meant, /MT was the default setting, so the first version i posted was already static/correct, the problem must have been something else.
  144. Sorry that was very confusing, this version has...

    Sorry that was very confusing, this version has it changed from /MT to /MD: 18298
    And it's a lot smaller, so it can't possible include more libraries than the last one?
  145. Replies
    8
    Views
    4,058

    Awesome, thank you! i am bit confused what is...

    Awesome, thank you!
    i am bit confused what is going on here:
    TCHAR manifestPathname[_MAX_PATH];
    GetAndroidManifestPathname(manifestPathname, androidDirectoryPathname);
    LPSTR pAndroidManifestData...
  146. hmm.. i don't know, in visual studio i use...

    hmm.. i don't know, in visual studio i use settings "edittime" and do a 'build solution', should work?
    the .mfx file is in the \Extensions\ directory, correct?

    here's another copy (new icon):...
  147. Done, no idea why this happens, but with my own...

    Done, no idea why this happens, but with my own extension it works fine: http://community.clickteam.com/threads/95090-droidtouch-Android-amp-iOS-simple-alternate-touch-detection
  148. droidtouch [Android & iOS] simple alternate touch detection

    This extension does not do anything interesting, you don't need this unless you have a problem.
    I made this because in two of my projects, the multiple touch object and the regular mouse click...
  149. Replies
    8
    Views
    4,058

    What if you need to add lines to other files,...

    What if you need to add lines to other files, such as adding activities to AndroidManifest.xml?
  150. Replies
    53
    Views
    10,339

    hehe, okey, i tried the latest version again,...

    hehe, okey, i tried the latest version again, getting.. you guessed it: 'Chartboost/CBNewsfeed.h' not found. i'll try to remove all the references to it next time if that's the only file that doesn't...
  151. Yeah, i created an extension for this on android:...

    Yeah, i created an extension for this on android: http://community.clickteam.com/threads/93334-My-first-extension!-Android-quot-AppInstalled-quot-check-if-an-app-is-installed/page2

    Unfortunately...
  152. Multiple touch and mouseclick event issues

    So i was having some issues with this on Android, and now it seems to be happening on iOS as well (on a different project).
    The multiple touch object is completely unresponsive, it just doesn't...
  153. Replies
    53
    Views
    10,339

    is the latest version of chartboost currently...

    is the latest version of chartboost currently compatible? (version 6) i am using an older version just in case.
  154. I submitted an app yesterday with xcode 6, works...

    I submitted an app yesterday with xcode 6, works fine (i hope). Was some issues submitting the week before but can still submit with application loader.
  155. you'll need to use the time and date object to...

    you'll need to use the time and date object to get the current date and time, then add +2 to minutes f.ex. it's a bit inconvinient since if the time is 59, then you'll need to calculate to next hour...
  156. Replies
    5
    Views
    1,422

    ca-app-pub-## on both, admob id is banner id and...

    ca-app-pub-## on both, admob id is banner id and interstitial id is interstitial id.
  157. Multiple touch not working after update?

    I've updated to 285.1 and multiple touch no longer works, anyone else noticed any problems with it?
    Tapping the admob banner works, but nothing else within my app.

    I am trying to find the cause,...
  158. Replies
    18
    Views
    4,474

    Just had the same issue, but there is a fix, on...

    Just had the same issue, but there is a fix, on organizer instead of submitting: click "export" then you can save the .ipa file and use application loader to submit your app.
  159. Hmm.. looks like a mess, you can have up to 50...

    Hmm.. looks like a mess, you can have up to 50 drones and you send the x,y coordinate for each of them every frame? that's not going to end well. As long as they go in a straight line, or exactly the...
  160. There is no lacewing object in your example?

    There is no lacewing object in your example?
  161. yeah make sure you can actually compile the thing...

    yeah make sure you can actually compile the thing first ;)
    i would do it fast, <24/48 hours, i haven't made many extensions so won't mind some practice, but i also have lots of other stuff to do, so...
  162. Replies
    8
    Views
    1,596

    Yes it does this for all ad networks on android,...

    Yes it does this for all ad networks on android, i think it also did this on the previous version? but i have been updating the sdk manually, so that could be why. I think it's usually convenient, if...
  163. I guess it's just not that popular, what do you...

    I guess it's just not that popular, what do you use it for and how? it shouldn't be much work making an iOS extension to do this.
    f.ex if i made an extension to do those 4 expressions and return a...
  164. Replies
    12
    Views
    2,166

    yeah use a server, it can be done securely very...

    yeah use a server, it can be done securely very easily, but you would have to use the get object to do the request over a working internet connection to verify the time.

    I would do something like...
  165. Supersonic is both a service similar to...

    Supersonic is both a service similar to Chartboost and also a mediator that supports rewarded video ads from 7 other top ad networks.
    To implement unity video ads, all you have to do is drop 3 files...
  166. Agreed, i am doing this on my own:...

    Agreed, i am doing this on my own: http://community.clickteam.com/threads/94448-Supersonic-ads-and-mediation-extension-in-development!-could-use-some-help

    I haven't tested unityads yet, but it...
  167. Replies
    39
    Views
    5,806

    hehe, yeah Outcast, that's exactly what i do ;)...

    hehe, yeah Outcast, that's exactly what i do ;) and i am making an extension for supersonic ad mediation, which also supports adcolony, vungle, applovin etc. Still testing, but seems to work really...
  168. Replies
    39
    Views
    5,806

    No problem Robotica ^^ Perry! i noticed a...

    No problem Robotica ^^

    Perry! i noticed a problem with two ads showing at the same time, and i can't figure out why this happens, have you managed to isolate this issue and got a way to fix it?
    I...
  169. Replies
    8
    Views
    1,287

    use two conditions: value > target - 0.5 value...

    use two conditions:
    value > target - 0.5
    value < target + 0.5

    if you set the position with round(value) it should be the exact pixel rather than one off.
    you could perhaps also compare...
  170. Replies
    10
    Views
    1,819

    mobichan: yes it scales down, but with an equal...

    mobichan: yes it scales down, but with an equal percentage for both X and Y, meaning it's not distorted and looks good.
    Outcast: yeah kind-of, just change the window size temporarily to test...
  171. Replies
    39
    Views
    5,806

    you can't test for interstitial cached and timer...

    you can't test for interstitial cached and timer equals at the same time, these are triggered conditions!
    you'll have to store if the ad is cached or not somewhere else.

    for testing i would put a...
  172. Replies
    39
    Views
    5,806

    A triggered (green) condition should always be...

    A triggered (green) condition should always be the first on the list,
    do something like:

    +Interstitial located at "demo" cached
    - Set flag 0 on

    +On time 00"-XX'
    +Flag 0 is on
    - Show...
  173. Replies
    31
    Views
    4,359

    Multiple of the same object is better than a big...

    Multiple of the same object is better than a big object, f.ex two 32x32 objects (same object) is faster than one 32x64 object. But i don't know by how much.
    You could test it by doing both on an old...
  174. Replies
    31
    Views
    4,359

    10 backdrops is definitely better than 1 active,...

    10 backdrops is definitely better than 1 active, 100 backdrops is probably better than a big active, not sure about 1000 :P
  175. You can use screen capture object to take...

    You can use screen capture object to take pictures of the frame, even if it goes outside your monitor :) your only missing a few pixels so should be playable, mine usually are and i am running a...
  176. Resolved by using multiple touch. Not sure why...

    Resolved by using multiple touch.
    Not sure why it works, but i replaced all mouseclick events with the multiple touch object and set all frames to multiple touch mode, this works great!
    I also had...
  177. Replies
    18
    Views
    4,474

    Pretty sure it won't easily support the new ipad...

    Pretty sure it won't easily support the new ipad multitasking with multiple apps running at the same time, since it requires a specific mode to be the right or left part of the screen with another...
  178. Unreliable mouseclick events (loss of focus?) how this this work in xocde?

    So i have noticed in general that clicking objects might not always register, f.ex when using the 'user clicks on X' event, and it seems like a chartboost ad is a lot harder to close from a fusion...
  179. Replies
    10
    Views
    1,819

    Oh that's a convinient tool, i set it to portrait...

    Oh that's a convinient tool, i set it to portrait mode with window size 750x1024 and the frame size 768x1334.
    Then you can see that you will fit the entire screen on all devices without distortion,...
  180. Replies
    3
    Views
    702

    Yeah it's confusing with a complete redesign, but...

    Yeah it's confusing with a complete redesign, but shouldn't take too long to figure out.. i haven't been able to find user reviews tho.
  181. Replies
    10
    Views
    1,819

    What i do is use the "fit inside and adjust...

    What i do is use the "fit inside and adjust window size" option, it makes it perfectly crisp on all devices.
    Here's an example: 17806
    It will show 1334x750 on iphones 5,6; 1125x750 on iphone 3,4;...
  182. Replies
    5
    Views
    2,910

    that's true, i'll need to make a flash port of my...

    that's true, i'll need to make a flash port of my game :)
  183. Replies
    5
    Views
    2,910

    I think it's been almost 5 years without any...

    I think it's been almost 5 years without any updates to the lacewing relay extension.. But it works on windows and android!
    Still eagerly waiting for someone to do an iOS port, i would give it a go...
  184. Supersonic ads and mediation extension, in development!, could use some help

    So i manage to create a working iOS extension for the Supersonic ad network.
    teaser: 17786

    Similiar to the Chartboost extension you'll need to add frameworks manually, also one linker flag, but...
  185. Replies
    19
    Views
    4,307

    Yeah, well i haven't updated yet, so the...

    Yeah, well i haven't updated yet, so the purchases will fail ;) but i'll guess i'll have to push the update now and just hope for the best.
  186. Replies
    19
    Views
    4,307

    It's my games identifier...

    It's my games identifier (com.yourcompany.yourapplication/.Main)

    edit1:
    I have now tested on another clean device (just did factory reset)

    Same problem, uploaded log here:...
  187. Replies
    19
    Views
    4,307

    arrgh.. my game currently crashes whenever you...

    arrgh.. my game currently crashes whenever you close the purchase dialog. (game freezes, get's a pop-up asking to close unresponsive app)

    some logging from cancelled purchase:
    09-21 13:06:15.633:...
  188. Replies
    19
    Views
    4,307

    Promising to hear it's working!, i actually...

    Promising to hear it's working!, i actually disabled all in-app purchases in the game while the issue needs to resolved, i have just been really busy with something else and not got around to...
  189. Replies
    4
    Views
    1,757

    On my computer when i disconnect my phone, fusion...

    On my computer when i disconnect my phone, fusion gets stuck and won't delete it until i reconnect it.
    You could also force an error to keep the temp files, putting a number as a first character in...
  190. Replies
    14
    Views
    4,706

    Wow this looks great, lots of nice customization...

    Wow this looks great, lots of nice customization :)
  191. Replies
    1
    Views
    784

    yes! i just posted a kind of guide on this other...

    yes! i just posted a kind of guide on this other thread: http://community.clickteam.com/threads/93461-Get-Android-Project-instead-of-APK
    not specific to eclipse tho, should be possible, personally i...
  192. Replies
    2
    Views
    778

    yeah sounds tricky, are you using all the...

    yeah sounds tricky, are you using all the available axis at your disposal? i would definitely do some kind of calibration when the game is first started, and maybe make it work in a way where you...
  193. Replies
    4
    Views
    1,757

    Yes, it's very useful, this is my trick to do it:...

    Yes, it's very useful, this is my trick to do it:
    disconnect your android device and do a build-and-run, this should make fusion stuck after compiling and not automatically delete the temp files....
  194. Replies
    10
    Views
    2,603

    i think i got it, but it's just an old mmf1.5-...

    i think i got it, but it's just an old mmf1.5- extension, so it's not going to work when running your game.
    here it is in .cox format: 17275
    if you put it in the folder \Extensions\mmf1 you should...
  195. Replies
    19
    Views
    4,307

    The problem is that PurchasedQty( "In-App...

    The problem is that PurchasedQty( "In-App Android" ) returns 0.
    I have the same code/events that worked before, but now it doesn't. Obviously i need to consume the items, the problem is that i can't...
  196. admob also have some video ads with a miniumum 5...

    admob also have some video ads with a miniumum 5 seconds playback in their interstitials
  197. ah, great.. i selected edittime: 17237 this also...

    ah, great.. i selected edittime: 17237
    this also works for me, and made it smaller :) i don't understand why debug works on my copy of fusion but not others tho?
  198. Definitely useful to engage downloads. 1. You...

    Definitely useful to engage downloads.
    1. You can display ad(s) to download your other app(s) only if they don't already have them.
    2. You can use it to check if the other app is installed from...
  199. Replies
    19
    Views
    4,307

    urgent, in-app purchases not working?

    On the latest build 284.10 in-app purchases can no longer get the purchased items.

    This is extremely bad timing, because just a few days ago google decided to change the in-app purchases order id...
  200. Replies
    15
    Views
    3,820

    Any chanse of iOS extensions? :) We really really...

    Any chanse of iOS extensions? :) We really really need lacewing/bluewing on iOS! (cross-platform :D)
    I'd definitely be willing to donate, especially if it works with my current pylacewing server.
Results 1 to 200 of 500
Page 1 of 3 1 2 3