User Tag List

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Help event create object

  1. #1
    Clicker Fusion 2.5 (Steam)Fusion 2.5 Developer (Steam)Fusion 2.5+ DLC (Steam)Android Export Module (Steam)HTML5 Export Module (Steam)iOS Export Module (Steam)
    janpier's Avatar
    Join Date
    Dec 2014
    Posts
    119
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Help event create object

    hello, how do I create an event that could create the same object at the same distance, the 'event that I created you do not perform well. And how do I create a random item 1 or 3, skipping the number 2?Application ex.mfa

  2. #2
    Clicker Fusion 2.5 DeveloperAndroid Export ModuleHTML5 Export ModuleiOS Export Module
    Fusion 2.5 (Steam)
    schrodinger's Avatar
    Join Date
    Nov 2014
    Posts
    3,156
    Mentioned
    27 Post(s)
    Tagged
    1 Thread(s)
    what you need to change exactly?
    perhaps using a fastloop would make it more solid:

    Application ex_1.mfa


    if you need a random number among 1 and 3 (without 2)

    you could do:

    random(2)*2+1

    or play with strings:

    val(mid$("13",random(2),1))

  3. #3
    Clicker Fusion 2.5 (Steam)Fusion 2.5 Developer (Steam)Fusion 2.5+ DLC (Steam)Android Export Module (Steam)HTML5 Export Module (Steam)iOS Export Module (Steam)
    janpier's Avatar
    Join Date
    Dec 2014
    Posts
    119
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Hello, thank you very much for the advice, but there is a problem with the creation, sometimes it comes out 1, then 2 that turns it back to 1 getting me out of the object in the same place, I also came out three times below 2Application ex_1 (1).mfa

  4. #4
    Clicker Fusion 2.5 (Steam)Fusion 2.5 Developer (Steam)Fusion 2.5+ DLC (Steam)Android Export Module (Steam)HTML5 Export Module (Steam)iOS Export Module (Steam)
    janpier's Avatar
    Join Date
    Dec 2014
    Posts
    119
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    and the objects should be created immediately after reaching an X position and not every 3 seconds

  5. #5
    Clicker Fusion 2.5 DeveloperAndroid Export ModuleHTML5 Export ModuleiOS Export Module
    Fusion 2.5 (Steam)
    schrodinger's Avatar
    Join Date
    Nov 2014
    Posts
    3,156
    Mentioned
    27 Post(s)
    Tagged
    1 Thread(s)
    I think I've not understood exactly what you need,
    could you try writing down your requirements in greater detail

    You want specific pair of object created in a specific moment and specific positions,
    under which exact rules?

  6. #6
    Clicker Fusion 2.5 (Steam)Fusion 2.5 Developer (Steam)Fusion 2.5+ DLC (Steam)Android Export Module (Steam)HTML5 Export Module (Steam)iOS Export Module (Steam)
    janpier's Avatar
    Join Date
    Dec 2014
    Posts
    119
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    hello Schrodinger, I wish that when an object reaches, for example, the 200X position it would create another object in a Y position which is not the same as before. for this I put the counter that creates objects in different positions depending on the number of the counter. with your event instead come out every 3 seconds and the counter sometimes creates the same number letting out the objects in the same position

  7. #7
    Clicker Fusion 2.5 DeveloperAndroid Export ModuleHTML5 Export ModuleiOS Export Module
    Fusion 2.5 (Steam)
    schrodinger's Avatar
    Join Date
    Nov 2014
    Posts
    3,156
    Mentioned
    27 Post(s)
    Tagged
    1 Thread(s)
    Ahh ok, I think I understand now,
    perhaps something like this?

    Application ex_2.mfa

  8. #8
    Clicker Fusion 2.5 (Steam)Fusion 2.5 Developer (Steam)Fusion 2.5+ DLC (Steam)Android Export Module (Steam)HTML5 Export Module (Steam)iOS Export Module (Steam)
    janpier's Avatar
    Join Date
    Dec 2014
    Posts
    119
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Very thanks

  9. #9
    Clicker Fusion 2.5 (Steam)Fusion 2.5 Developer (Steam)Fusion 2.5+ DLC (Steam)Android Export Module (Steam)HTML5 Export Module (Steam)iOS Export Module (Steam)
    janpier's Avatar
    Join Date
    Dec 2014
    Posts
    119
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Unfortunately there was a problem, I changed the size of the screen and the size of the active objects, and the event that had to change position to the objects now also changes for scrolling objects. In addition, I added a different object with a non-random position, but he is created in different positions even though he should not. Can someone help me ?Application ex_2.2.mfa

  10. #10
    Clicker Fusion 2.5 DeveloperAndroid Export ModuleHTML5 Export ModuleiOS Export Module
    Fusion 2.5 (Steam)
    schrodinger's Avatar
    Join Date
    Nov 2014
    Posts
    3,156
    Mentioned
    27 Post(s)
    Tagged
    1 Thread(s)
    You had a couple inverted actions,
    the "create object" when counter = 2 came after you "set positions" for those objects,
    while you should create objects before you set their positions,
    otherwise all objects of that kind will be affected (except those you create right after!)

    Application ex_2.2.mfa

    While it seems to me the new object is always created at same position

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Bug in my create object event
    By fishrod in forum Multimedia Fusion 2 - Technical Support
    Replies: 5
    Last Post: 9th March 2014, 03:08 PM
  2. global event to create an object
    By aylictal in forum Multimedia Fusion 2 - Technical Support
    Replies: 5
    Last Post: 10th September 2012, 08:47 PM
  3. Create Object Event
    By dcrew in forum Multimedia Fusion 2 - Technical Support
    Replies: 13
    Last Post: 13th October 2010, 03:58 AM
  4. Issue of "Create object" event
    By ASD in forum Multimedia Fusion 2 - Technical Support
    Replies: 3
    Last Post: 6th November 2007, 05:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •