User Tag List

Results 1 to 4 of 4

Thread: Small initial start help

  1. #1
    Clicker Fusion 2.5 (Steam)

    Join Date
    Feb 2018
    Posts
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Smile Small initial start help

    (moved to correct catergory)

    ok... again, its a small offer.

    i want a working example of something that im working on. (ive redone it 4 times now)
    i start to get into it, and it gets a bit messy, then i get to a spot that i realize I could have done it this way...and have to start over.
    sounds fun right? it would be, however... I have a terrible memory, and forget some of the things I learned the first time thru... and ended up doing a few of the mistakes
    that I had corrected in 2 ... well you get the idea.

    SO, Working on a small app. Standard. no export modules (yet)
    I bought a spreadsheet importer off the marketplace. (did exactly what i needed, after trial 2)

    I'll say the overall desires, and such first, and also, im not worried about the visual aspects in this setup yet.
    I just want to get past step 1.

    Overal: I want to input Numbers, and have it output result. simple sounding right?

    First, each State of the US, has different rules. So I need to have spreadsheet numbers based on each state. (some states Rules cover other states, so it can be shared)
    1) so need to link state, by the 'rules'
    2) Supply=each state has different Suppliers. (mostly in groups of states, so alot of overlap there too)

    A) input state (or select etc)
    B) Based on state-choice1 Material choice (W or S)
    B1) if no supplier of choice in that state, it wouldnt show at all.
    C) Assume S: numbers input, Width, Length, Height. is Baseunit1=Result
    D) choice 2 also numbers 0 1 or 2 times baseunit1 L*H
    E)Choice 3 numbers 0, 1 or 2 times Baseunit1 W*H
    F) if choice 3 =>1 then option ..and so on.

    now, the C) section pulls numbers from spreadsheet Tabs. (tabs made based on the State rules above)
    I can make the spreadsheet file easy enough. however, i have to remake it every few months. (as numbers change)

    the Results calculated would/could be from multiple tabs, but different based on supplier. (as 2 or 3 suppliers might do the same state)

    Im hoping this all makes sense. to me its simple, but my explaining it, might make it a mess.
    Im going to give this out free, as a help tool. but I want control of it, so i can control the updates to it.

    So... offer would be to pay someone to help get me thru this, here and there.
    right now. Frame1 get the spreadsheet loaded, and Baseunit1 result (for at least 2 tabs-so i know it works)

    again, STANDARD only.
    module: loadcsv ( http://clickstore.clickteam.com/index.php?route=product/product&search=csv&product_id=300 )

    Msg me ( email giantkin at giantkin d ot c o m )
    (Serious only- budget conscious)

    g

  2. #2
    Clicker Fusion 2.5 (Steam)

    Join Date
    Feb 2018
    Posts
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Is my project too small? It probably wouldnt take someone an hour or 3 to do the initial setup. but after i see that, I would expand the project some. (time is what i dont have)

  3. #3
    Clicker Fusion 2.5 (Steam)

    Join Date
    Feb 2018
    Posts
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Had few bites. even had one say yes, but no contact after that. Give me a price. Negotiate. this project is NOT difficult, good for a beginner-intermediate. as it progresses, i plan on adding a few features. but the base app is simple. (or just get me started, there are too many ways to do the same thing, im hoping for the easiest UPDATE method. (ie: after its setup, i can adjust the numbers to fit new rules. and easily add new baseline numbers.)

  4. #4
    Clicker Fusion 2.5 (Steam)

    Join Date
    Feb 2018
    Posts
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    example

    Buildings.mfa ok, maybe this will help show what i am trying to do. (i dont care about how it looks yet, just working)
    atm, if you run this, Select ohio, steel... (you can hit 18 and 20 and it changes the score, but only 12 works past this point)
    hit 12. eventually need all to work ofc. but hit 21. then 6 (red button finalizes) then its either option, and button, then either option. then it sits there. (close)

    oh, you hit the green load button..it opens dialog. select a cvs file. (i want to load the data from a cvs file eventually)
    the above is working based on numbers I manually embedded.

    Hope this sparks someones interest.

    First thing i need/want is to load the csv file, (maybe if i can make it as an admin only load... and its embeded after that on run?)
    the csv file would have multiple tabs. (sheets?) starting with 3, but 12 would be nice. (depending on other factors I suppose)

Similar Threads

  1. [PAID] for 6 weeks pixel art and shaders (start ASAP ending start of December)
    By roxflame in forum Paid Design & Development Requests
    Replies: 1
    Last Post: 22nd October 2017, 05:54 PM
  2. [PAID] for 6 weeks prototyping (start ASAP, ending start of December)
    By roxflame in forum Paid Design & Development Requests
    Replies: 0
    Last Post: 10th October 2017, 03:39 AM
  3. INI initial save and IOS
    By GameMaker2019 in forum iOS Export Module Version 2.0
    Replies: 6
    Last Post: 18th February 2013, 09:34 AM
  4. Global Value initial value with ini
    By ratty in forum iOS Export Module Version 2.0
    Replies: 3
    Last Post: 2nd July 2012, 08:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •