User Tag List

Results 1 to 7 of 7

Thread: Beta 4 - EXC_BAD_ACCESS crash

  1. #1
    Clickteam Clickteam
    Kisguri's Avatar
    Join Date
    Jun 2006
    Location
    Bakersfield, CA
    Posts
    3,054
    Mentioned
    32 Post(s)
    Tagged
    3 Thread(s)

    Beta 4 - EXC_BAD_ACCESS crash

    I have a bug, I keep getting these type of bugs during running of any of my projects with the new betas 1-4 post release, some one please tell me what you need from me to figure out what I am doing wrong or if it's a problem with the runtime. These problems do not exist in the official release. Thanks in advance for the input.

    [Session started at 2012-04-09 21:46:19 -0400.]
    GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
    Copyright 2004 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys000
    Loading program into debugger…
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    Program loaded.
    target remote-mobile /tmp/.XcodeGDBRemote-225-50
    Switching to remote-macosx protocol
    mem 0x1000 0x3fffffff cache
    mem 0x40000000 0xffffffff none
    mem 0x00000000 0x0fff none
    run
    Running…
    [Switching to thread 7171]
    [Switching to thread 7171]
    sharedlibrary apply-load-rules all
    continue
    AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
    Program received signal: “EXC_BAD_ACCESS”.
    Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
    Cannot access memory at address 0x2fdfe9b8
    Cannot access memory at address 0x2fdfe9b8
    (gdb)

  2. #2
    Clicker

    Fusion 2.5 MacFusion 2.5 DeveloperAndroid Export ModuleHTML5 Export ModuleiOS Export ModuleSWF Export ModuleInstall Creator ProUnicode Add-on
    StingRay's Avatar
    Join Date
    Nov 2006
    Location
    Austria
    Posts
    1,027
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Maybe your Audio Codec?!?

  3. #3
    Clicker Multimedia Fusion 2 DeveloperiOS Export ModuleSWF Export Module
    Francois's Avatar
    Join Date
    Jul 2006
    Location
    Montpellier, France
    Posts
    6,920
    Mentioned
    0 Post(s)
    Tagged
    1 Thread(s)
    Please just send me a mfa that has the problem, and the XCode project of the same mfa. Does it occur on the simulator?

  4. #4
    Clickteam Clickteam
    Kisguri's Avatar
    Join Date
    Jun 2006
    Location
    Bakersfield, CA
    Posts
    3,054
    Mentioned
    32 Post(s)
    Tagged
    3 Thread(s)
    I sent you a e-mail today with the MFA Francois, also note after reverting back to the original iOS runtime release, and attempting to compile another game I get this warning...


    [Session started at 2012-04-10 22:13:14 -0400.]
    GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
    Copyright 2004 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001
    Loading program into debugger…
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    Program loaded.
    target remote-mobile /tmp/.XcodeGDBRemote-187-58
    Switching to remote-macosx protocol
    mem 0x1000 0x3fffffff cache
    mem 0x40000000 0xffffffff none
    mem 0x00000000 0x0fff none
    run
    Running…
    [Switching to thread 7171]
    [Switching to thread 7171]
    sharedlibrary apply-load-rules all
    continue
    AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
    Program received signal: “EXC_BAD_ACCESS”.
    Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
    Cannot access memory at address 0x2fdfe8f4
    Cannot access memory at address 0x2fdfe8f4
    (gdb) ^C

    and a shutdown, is it my sound samples?

  5. #5
    Clickteam Clickteam
    Kisguri's Avatar
    Join Date
    Jun 2006
    Location
    Bakersfield, CA
    Posts
    3,054
    Mentioned
    32 Post(s)
    Tagged
    3 Thread(s)
    Same issue after using the new Dat file you sent Francois, could it be because I am using Xcode 3.2.5?

  6. #6
    Clickteam Clickteam
    Kisguri's Avatar
    Join Date
    Jun 2006
    Location
    Bakersfield, CA
    Posts
    3,054
    Mentioned
    32 Post(s)
    Tagged
    3 Thread(s)
    After testing Noble Armada on the new Dat File and Beta 4 I get the following in the console....

    [Session started at 2012-04-11 22:36:55 -0400.]
    GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
    Copyright 2004 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001
    Loading program into debugger…
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    unable to read unknown load command 0x25
    unable to read unknown load command 0x26
    Program loaded.
    target remote-mobile /tmp/.XcodeGDBRemote-214-60
    Switching to remote-macosx protocol
    mem 0x1000 0x3fffffff cache
    mem 0x40000000 0xffffffff none
    mem 0x00000000 0x0fff none
    run
    Running…
    [Switching to thread 7171]
    [Switching to thread 7171]
    sharedlibrary apply-load-rules all
    continue
    AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
    Program received signal: “EXC_BAD_ACCESS”.
    Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
    Cannot access memory at address 0x2fdfe9b8
    Cannot access memory at address 0x2fdfe9b8
    (gdb)

    I am updating Xcode currently

  7. #7
    Clicker Multimedia Fusion 2 DeveloperiOS Export ModuleSWF Export Module
    Francois's Avatar
    Join Date
    Jul 2006
    Location
    Montpellier, France
    Posts
    6,920
    Mentioned
    0 Post(s)
    Tagged
    1 Thread(s)
    Just tried Noble Armada again on my iPod. I get no crash at all. I cant get past choice screen (touching the center has no effect).
    Can you tell me how to get past that screen, and exactly where it crashes and how to get the crash?

Similar Threads

  1. [Crash] Beta 32
    By Popcorn in forum Android Export Module Version 2.0
    Replies: 1
    Last Post: 18th August 2012, 03:33 PM
  2. Beta 9: EXC_BAD_ACCESS
    By Renatos in forum iOS Export Module Version 2.0
    Replies: 1
    Last Post: 30th May 2012, 06:53 AM
  3. Beta 12: Crash report
    By Kisguri in forum Android Export Module Version 2.0
    Replies: 5
    Last Post: 10th January 2012, 09:10 PM
  4. Beta 21: MMF crash
    By AndyH in forum iOS Export Module Version 2.0
    Replies: 0
    Last Post: 31st May 2011, 12:32 PM
  5. beta 6 crash
    By MrMan in forum Hardware Accelerated Runtime
    Replies: 0
    Last Post: 15th September 2009, 05:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •