hi, I need help.
I need an MMF 2 extension to insert in my home automation software and the only one I found that allows me to go on the internet is web view object. I need to include internet browsing in my software because I want to connect to my web cams with an ip address, but unfortunately that extension doesn't open many pages. I think it's too old. do you have any advice for me to use an updated extension, compatible with almost all web pages?
Thanks a lot
Posts by daniele
Welcome to our brand new Clickteam Community Hub! We hope you will enjoy using the new features, which we will be further expanding in the coming months.
A few features including Passport are unavailable initially whilst we monitor stability of the new platform, we hope to bring these online very soon. Small issues will crop up following the import from our old system, including some message formatting, translation accuracy and other things.
Thank you for your patience whilst we've worked on this and we look forward to more exciting community developments soon!
Clickteam.
A few features including Passport are unavailable initially whilst we monitor stability of the new platform, we hope to bring these online very soon. Small issues will crop up following the import from our old system, including some message formatting, translation accuracy and other things.
Thank you for your patience whilst we've worked on this and we look forward to more exciting community developments soon!
Clickteam.
-
-
You are very kind and helpful. Thank you for your help
-
I thank you very much for your help, unfortunately I could not adapt your code to my code. your example is perfect and works very well, but I have problems with sub applications. if I put the settings you gave you, at normal resolution, they do not fit correctly. I try to do some tests, but I do not think I can get positive results.
Thanks again, you have been a great help -
Thank you for your help.
I tried, but the sub applications no longer appear in place, they act as if the resolution had not changedPlease login to see this attachment.Please login to see this attachment.
I sent you two photos:
one with an original resolution of 1280x800 with the window on the right that appears correctly
the second picture I made the changes as you told me, but the window on the right appears in the center of the home -
Or a Game..
In that case idk..I'm assuming you tried selecting Change resolution mode under the settings tab under Full screen mode?
EXACT I tried the change resolution mode, but it works only on higher resolutions. Unfortunately, a good part of the Software is cut.
With MMF2 I tried all the functions, but without getting the result. I tried to download the Ultimate Full screen extension, but with sub application it has problems. -
Unfortunately it is not possible, the Software is very complex and must be compatible with many monitors. However it is not an App. There is no external system that adapts a high resolution to the lowest one? downscaling
-
Hi, I have a problem with the resolution of a software that I have made for home automation.
I developed the graphics with 1280x800 resolution but it is not possible to adapt this resolution on cards that have lower resolution.
Unfortunately "change resolution mode" does not work because I have used a special "sub application" extension.
is there an extension that could adapt to a lower resolution?
Thanks -
thanks,
it is compatible for Android extension?I find the example, but i not find the extension bluetouth.mfa thie extension is avaiable?
-
hello guys, I'm making a video on my youtube channel very interesting. I want to turn on the relay with bluetooth and I would like to realize the 'app with MMF2,5 dev. I know if there is an extension that has the bluethoot?
Regards -
thank you
I have solved with a more simple system, but it is not very effective.
Your method is much more functional even higher than those shown.
Thanks so much -
thanksJoshtek for your help, but I had trouble understanding...
-
-
-
I have to make a comparison between two numbers, but with a tolerance eg:
I have a value of 200 in a string
I must have an active object that, when the x value compared to the value of 200 is the highest 2% or more lower than 2%, the banner is green, otherwise (else) turns red
the value 200 is a dynamic value read from a hardware device that goes from 0 to 250 (the elettrcia mains voltage)
inside an edit box I have to put the value that I read with the tester into an electrical socket
If the tester read 232 volts, I enter this value in the 'edit box.
if the voltage read from my hardware unit is next to that +/- 2% it means that the system is calibrated ok and a graphic banner changes state.
You can help me? -
OMG!!!! I tried it now because I could not get into the forum.
you have done a wonderful thing ... I tried it and it works really well.
This is an extension that I feel is important for mmf2.
you have been very good, congratulations and thanks for your help. -
exact, there is an active x component of VLC, but this component does not work. I installed VLC player and active x component.
There are two version1: v1 that has controls for volume, etc., and the v2 version that URL to play the streaming radio.
Unfortunately that component does not work and the 'only one that works is the windows media player, but it does not have the volume parameters.
You can help me understand how to control the volume of the active x windows media player component? -
Hello everyone, I have a problem that after so many months is still present. I asked for help in this forum many times, but I never got an answer, maybe because it's something that you can not be realized
I want to create a streaming radio with MMF is I only found a solution. active x windows media player, but there is no volume control. I can only adjust the volume with the mouse.I tried using direct show because there is a parameter volume, but I can not play the radio station.
This is a link that works with the component activex windows media player but it is possible to control the volume?
Please login to see this link.
Please login to see this link.
Please login to see this link.I also downloaded the active component x vlc but the radio station does not play.
I beg you ... I beg you, I ask for help for the 'last time, I hope someone can help me.
Regards -
Everyone knows MMF2 as a platform for making games, I have used this tool for automation and home automation. I was able to realize the hardware interfaces that could be managed by MMF 2 and due to the "serial object extension" I could use Arduino well as the acquisition of more than 96 digital inputs and 20 analog. I love MMF2, it has allowed me to realize a big project.
Can someone help me understand why if I convert the files for Android, the chat does not work? I used only compatible extensions ...
-
You been very thorough ... Unfortunately, one minute is a lot, even 10 seconds are so many.
My home automation system is very complex and large. For now use teamviewer as a remote control, and the times are very fast, up to 2 seconds of latency.
The system that I tried with the chat and the public server is very fast and for me it was an easy to manage solution.
I do not require a database, my Software has one inside. The one that I need, is a control for lights, sockets, temperature, etc., and I have to have the 'access to view and control.
I wanted the easiest way for me and for the customer.
I would like to have a server as the one used by lacewing, but I have one that I use my available for my clients.
Could I have a dedicated PC for this application always on, you can do this?
My site is made with jimdoo and I do not think I can write a php page, I just know that I can insert script. -
Thanks SCHRODINGER for your suggestions.
Unfortunately I exclude port forwarding because it is not easy to open a door for the average user, and it is not always possible to open a port for your router. I for example I have a contract with Fastweb and my router does not allow to write the DNS and does not open the doors.
what it costs to buy a server like the one I used for this chat? in this case I have no fear that this server can be closed if I pay to keep it open. Use third-party servers is not convenient because it may close at any time.
why this application does not work this chat on smartphones? my main problem is to understand because the file I posted, if converted for Android does not work. You know you help me?
The program works, but it seems that does not communicate with the server