Build 292.10 - Release version

If you change the frame of an active object and it's in a group that isn't active at start - it never triggers. (This is not new.) But would it be possible to change that at some stage?

It's easy to work around - you just have to change the frame in a group that is active from the start - but it would be nice to eliminate that extra step.

Also there are several issues with loops... I guess there's no way at this stage to know what's been reported or not?

[MENTION=5114]Yves[/MENTION] Hello. I found 2 problem. 1)I create new clean application, setup to string bounce ball movement (add deceleration parameter) and run it on 60 fps and 30 fps. Enable or disable machine independent speed and V-Sync no help to fix this. If i start game and object start moving on old pc or on 30fps on new pc the object no full moving to position on 60fps. Screenshot: Please login to see this picture.
2)For AMD GPU Active Direct Show freeze video <15 fps for NVIDIA and no GPU or integrated GPU work good on 60 fps. Please fix this.

Attached is an example of the object frame that won't change - I've given you 2 different examples - and how I overcome the issue on Frame 2.

As for the loops: When Fusion can't execute a loop for whatever reason - it freezes for a second or two and then crashes the frame that I'm running - once I change the loop so that it executes correctly, it no longer crashes - so probably not worth bothering with, but next time I'll save a copy of the "broken" code before fixing it so I can recreate the crash.

The 2nd problem with loops are that they're random - if I tell Fusion to create 5 objects with a lot of look-ups / variables / qualifiers - I will end up with a random number of objects between 2 and 5. The simplest work around is to just copy the code down 5 times and then I get 5 objects every time - so I know it's not the code, it's just the code inside a loop. I'll post an example when it happens again - I've encountered it twice, and the code I was using was different each time.

It looks like if Direct3D 11 is being used, the game will not change the font name with the "Set font name to" expression.

Not sure if it's a (mostly inconsequential) bug or intended behaviour, but if I change the value of object's Alterable Value via the properties section of the frame window, then immediately navigate to another editor (storyboard/event etc), the change to the alterable value doesn't take place.

i.e.
- Select an object in the frame editor
- Type in a new number for Alterable Value A for the object in its properties
- Click on the button for the event/storyboard/event list editor while the text field for the alterable value still has focus
- The object still has the original value in that field

If you try it through the event editor, it greys out the frame/event/list buttons (but clicking on the storyboard editor will not replicate the issue and stores the new value)

Okay, thank you for the workaround, Yves.

[MENTION=5114]Yves[/MENTION] Ok, i try to explain. 1)I need to move string to +145 X position, i use bounce ball and deceleration parameter, if i run game with settings >=60 fps string move on +145 X if i run with 30 fps the string no normall move to +110 X (and all object move this + resizing no normall).
Video examlple run on 60fps: Please login to see this link. (text normall moving)
Video example run on 30fps: Please login to see this link. (text no normall moving and object resizing very slow)
But on 60 fps settings all work ok. Machine independent speed and V-Sync no help. Object need to work on 60fps (monitor support) but display on 30fps but if i setup 30 fps settings object work and display on 30 fps. (and freeze and work on <15 fps)
2)I use 480p25fps video, all AMD videocard no normal work with video. (video lag and freeze game on any resolution) Or video over to screen. (but i no use resizing over screen video object) Please login to see this picture.

after upgrading to this version. hide navigation/title bar action on android is not working properly. As soon as I tap anywhere on the screen, navigation bar pops up automaticly even I set always to hide.

also heading is unchecked.

Quote from alperoz49

after upgrading to this version. hide navigation/title bar action on android is not working properly. As soon as I tap anywhere on the screen, navigation bar pops up automaticly even I set always to hide.

also heading is unchecked.

Yes, I have the same issue - and I reported it in the Android section - but Fernando disagrees that there's a problem.

The show / hide Title Bar / Action bar also doesn't work correctly.

is it just me or is the new handy debugger resize feature not working anymore? can't resize it anymore no matter what I try..

Edit: It also starts as minimized every time, does not remeber it's last size and position anymore.

I now realize this may be because I'm using dual monitorns, maybe this is a known issue?

I have three monitors, and the debugger positioning and resizing is fine for me

Quote from Volnaiskra

I have three monitors, and the debugger positioning and resizing is fine for me

Ok good to know.. Now suddenly it remembers position and minimizing but still can't for the life of me change the size?! Strange..

Feature request (of the 'not essential but would be nice to have') variety:

Add an open all subgroups option to the context menu when you right-click a group in the event editors. This would open all subgroups (and sub-subgroups, sub-sub-subgroups etc.), while leaving all other groups in the frame intact.

This would make it a bit easier to isolate and access the 'branch' of the game that you're currently working on. It would allow you to quickly show all and only the events in that branch. To do this at the moment, we must either open all groups first then manually close all the irrelevant ones, or close all groups first then manually open all the relevant ones (either method is time-consuming).

Unchecking Visible at start in my layer properties has no effect.

Quote from Yves

What you can try: open regedit, go to HKEY_CURRENT_USER\Software\Clickteam\Fusion Developer 2.5\Debugger and delete the sp, wp and xh values.

Only have the wp value, not the sp or xh? Removed the wp value but still cant resize the debugger.