[Session started at 2012-03-21 20:33:04 -0400.]
GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001
Loading program into debugger…
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
unable to read unknown load command 0x25
unable to read unknown load command 0x26
Program loaded.
target remote-mobile /tmp/.XcodeGDBRemote-217-56
Switching to remote-macosx protocol
mem 0x1000 0x3fffffff cache
mem 0x40000000 0xffffffff none
mem 0x00000000 0x0fff none
run
Running…
[Switching to thread 7171]
[Switching to thread 7171]
sharedlibrary apply-load-rules all
continue
AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved
Program received signal: “EXC_BAD_ACCESS”.
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Can't find dlopen function, so it is not possible to load shared libraries.)
Cannot access memory at address 0x2fdfe9d0
Cannot access memory at address 0x2fdfe9d0
(gdb)
